The Tektronix 2467B 4 Channel Analog Oscilloscope includes all of the features and functionality of the 2465B and adds a Microchannel Plate Display. Option 5H also allows Tri-Level Sync Triggering for HDTV video signals.
Read More
The Tektronix 2465B, regarded as the Cadillac of Analog scopes, offers useful features that are hard to replicate in digital units. The 2465B has a bandwidth of 400MHz, 4 channels, up to 500 Ps/div timing resolution, offers auto setup and automatic measurements, the ability to save and recall Front-panel setups, provides cursor measurements and has 1% timing accuracy. The analog display allows gray scaling and persistence, whereby faster signals appear fainter than slower signals. And when an event only occurs occasionally in a repetitive signal, the anomaly will fade quicker and look dimmer than the rest of the waveform, which can provide critical information when analyzing complex designs. The 2465B also offers a real time display that responds instantly to changing signal conditions. Since it doesn’t have to acquire and then process signal information before displaying it like a digital scope, it can trigger on many more waveforms per second. And with a complete selection of trigger modes, the 2465B can display any signal regardless of its complexity.
Read More
The E&I 240L Amplifier produces 40 Watts of class A linear power output over the entire frequency range from 10 KHz to 12 MHz. It has very low harmonic distortion along with low IMD products. Operation over the band is achieved without the need for any band switching or indeed any adjustments. The power gain is rated at 50 dB with a typical gain flatness of +/- 1.5 dB. The 240L is built to withstand a 13 dBm input (1.0 Volt RMS) for any VSWR load condition.
Read More
The 240-C is a table-top, high power resistance decade box. The 240-C features six decade steps. The Clarostat 240C is a power resistor decade box that is a must in electronic and electrical work when dealing with known or unknown resistances … selected or determined under active operational conditions. The Clarostat 240C provides any ohm value, in 1 ohm increments, from 1 to 999,999 ohms. The 240C Decade Resistor provides known or unknown resistance values by simple dialing. Power ratings to 225 watts max. at 1000 Volts max. Six decades for quick setting and direct readout. The 240C can be used in actual circuits and under “live” conditions. Connections are made via two sets of terminals taking banana-plug, spade-lug, or plain wire connections.
Read More
The Model 2303 (45W) and 2304A (100W) Power Supplies provide voltage control and power monitoring for automated testing of portable, battery-operated devices. Both deliver up to 5A to handle portable device loads easily, while 100nA resolution (10µA on Model 2303-PJ) enables precise monitoring of sleep mode currents with 0.2% basic accuracy. Fast transient response simulates battery behavior, with output returning to within 100mV of the set voltage in 40µs or less. The ability to sink current enables these supplies to simulate the characteristics of a discharged, rechargeable battery for testing of battery chargers and charger-related circuitry. In addition to DC current measurements, these supplies can measure current pulses as short as 60µs and as long as 833ms. An optional remote display/control module permits the half-rack chassis to be mounted out of sight. Relay outputs permit external relays to be used in the control of tests. DVM inputs enable both supplies to measure and display DC voltages from anywhere in a test system, thus saving the expense and space needed to add a separate DMM.
Read More
The E&I 2200L Amplifier is a rugged source of RF power, useful for ultrasonics, laser modulation, RFI/EMI, plasma equipment and general laboratory applications. The 2200L represents E&I’s commitment to providing RF power amplifiers of the highest quality, durability and ruggedness. The 2200L produces 200 Watts of class A linear power output over the entire frequency range from 10 KHz to 12 MHz. It has very low harmonic distortion along with low IMD products. Operation over the band is achieved without the need for any band switching or indeed any adjustments. The power gain is rated at 53 dB with a typical gain flatness of +/- 1.5 dB
Read More
The E+I 2100L RF Amplifier is a rugged source of RF power, useful for ultrasonics, laser modulation, RFI/EMI, plasma equipment and general laboratory applications. The 2100L represents E&I’s commitment to providing RF power amplifiers of the highest quality, durability and ruggedness. The 2100L produces 100 Watts of class A linear power output over the entire frequency range from 10 KHz to 12 MHz. It has very low harmonic distortion along with low IMD products. Operation over the band is achieved without the need for any band switching or indeed any adjustments. The power gain is rated at 50 dB with a typical gain flatness of +/- 1.5 dB.
Read More
The Agilent 16903A logic analysis system provides high-performance, system-level debugging of digital designs. Expandability is the key to the system’s long-term value. Customize this system for your specific needs with innovative probing, high-performance measurement modules, and post-processing analysis tools.
Read More
The Agilent 16755A state and timing analysis module with 16M memory, delivers the performance and capabilities you need to debug and validate digital systems using today’s new high-speed system interconnects. The innovative “eye scan” mode in the 16755A enables you to examine eye diagrams and buses, on multiple circuit nodes simultaneously, for a rapid, comprehensive view of signal integrity. Another feature, “eye finder” automatically adjusts the position of the data valid window on every channel independently, ensuring the most reliable data capture on high-speed interconnects and buses.
Read More