The Agilent 1152A active probe’s bandwidth, superior accuracy, and reliability make it an ideal companion for the Agilent 54845A 1.5 GHz bandwidth oscilloscope. The low input capacitance of the active probe eliminates distortion caused by excessive loading. As frequency increases, probe tip capacitance decreases the impedance of the probe by Xc=1/(2pi*fC), resulting in measurement error, depending on the source impedance of the output device. The Agilent 1152A’s low tip capacitance becomes a distinct advantage as frequency increases. Nonintrusive, reliable probing provides faithful reproduction of signals.
Read More
The Agilent 1142A Probe Control and Power Module can power and control the 1141A Differential Probe, 1144A 800 MHz Active Probe and the 1145A 750 MHz Active Probe for SMD If the instrument does not have an internal 50-ohm termination, an external termination can be used with high-impedance inputs.
Read More
The Agilent 1141A is a 1X FET differential probe with 200 MHz bandwidth and 3000:1 CMRR (Common Mode Rejection Ratio) at 1 MHz. The probe has an input resistance of 1 MO and low input capacitance of 7 pF, to minimize circuit loading. The Agilent 1141A 200 MHz Differential Probe must be used with the Agilent 1142A Probe Control and Power Module. It can be connected to any instrument with 50 ohm inputs. An external 50 ohm termination can also be used with high impedance inputs.
Read More
The InfiniiMax 7 GHz 1134A probe amplifier (in conjunction with the E2669A differential or E2668A single-ended connectivity kits), was designed to be used with the Infiniium 6 GHz 54855A oscilloscope. This combination provides a full system bandwidth of 6 GHz to the probe tip. InfiniiMax maximizes measurement performance for both hands-on (e.g., browsing) or hands-off measurements, such as solder-in, socketed or SMA connections.
Read More
The InfiniiMax 5 GHz 1132A probe amplifier (in conjunction with the E2669A differential or E2668A single-ended connectivity kits), was designed to be used with the Infiniium oscilloscopes. This combination provides a full system bandwidth of 4 GHz to the probe tip. InfiniiMax maximizes measurement performance for both hands-on (e.g., browsing) or hands-off measurements, such as solder-in, socketed or SMA connections.
Read More
The Agilent 10076A 4 kV 100:1 passive probe gives you the voltage and bandwidth you need for making high-voltage measurements. Its compact design makes it easier to probe today’s small power electronics components and its rugged construction means it can withstand rough handling without breaking.
Read More
- « Previous
- 1
- …
- 536
- 537
- 538