The Agilent 11940A is a hand-held probe specially designed to measure magnetic field radiation from surface currents, slots, cable, and ICs for EMC diagnostic and troubleshooting measurements. Its unique design results in a high level of electric field rejection. This significantly reduces errors allowing calibrated and repeatable measurements. Each probe is calibrated and comes with a two-meter, RG-223 coaxial cable, an SMA (f) to Type-N (m) adapter, and an SMA (f) to BNC (m) adapter.
The Agilent 11904C is a metrology grade, 2.4 mm male to 2.92 mm female adapter with dc to 40 GHz operation. It is 13.3 mm in length and has a diameter of 9 mm.
The Agilent 11903C is a metrology-grade, 2.4 mm male to type-N female adapter with dc to 18 GHz operation.
See the Anoison PA5122C for alternate.
The Agilent 11903B is a metrology grade, 2.4 mm female to type-N female adapter with dc to 18 GHz operation.
The Agilent 11903A is a metrology-grade, 2.4 mm male to type-N male adapter with dc to 18 GHz operation.
The Agilent 1165A minature passive probe is a small, rugged, general purpose probe for use with the 54830B/D, 54831B/D and 54832B/D Infiniium oscilloscopes. It is fully compatible with the Agilent Auto-Probe interface which completely configures the Infin
The Agilent 1164A miniature passive probe is a small, rugged, general purpose probe for use with the Agilent 54810A, Agilent 54815A, Agilent 54820A and Agilent 54825A Infiniium oscilloscopes. It is fully compatible with the Agilent AutoProbe interface which completely configures the Agilent Infiniium oscilloscope for the probe. The probe is built and tested for high reliability and comes with a 3 year warranty. The cable has a Kevlar strengthener for added pull strength. The general purpose retractable hook tip is made from a durable music wire and probe tips are replaceable. The Agilent 1164A probe comes with a wide range of accessories including an Agilent Browser that installs over the probe tip. The Browser utilizes a crown point pogo pin that digs into solder and absorbs small hand movements, so is less likely to slip. There’s also an alligator lead for general purpose probing, 4 spring grounds for high frequency measurements, a socketed ground lead and IC clips for probing surface mount devices. The handle of the probe can be removed, leaving a miniature probe body with a narrow and sharp tip ideal for probing dense circuit boards.
The Agilent 1163A Miniature Passive probe is a small, rugged, resistive divider probe for use with the all Agilent Infiniium oscilloscopes. It is fully compatible with the Agilent AutoProbe interface which completely configures the Agilent Infiniium oscilloscope for the probe. The probe is built and tested for high reliability and comes with a 3 year warranty. The cable has a Kevlar strengthener for added pull strength. The general purpose retractable hook tip is made from a durable music wire and probe tips are replaceable. The 1163A probe comes with a wide range of accessories including an Agilent Browser that installs over the probe tip. The Browser utilizes a crown point pogo pin that digs into solder and absorbs small hand movements, so is less likely to slip. There is also an alligator lead for general purpose probing, 4 spring grounds for high frequency measurements, a socketed ground lead and IC clips for probing surface mount devices. The handle of the probe can be removed, leaving a miniature probe body with a narrow and sharp tip ideal for probing dense circuit boards.
The Agilent 1162A Miniature Passive probe is a small, rugged, general purpose probe for use with all Infiniium oscilloscopes. It is fully compatible with the Agilent AutoProbe interface which completely configures the Agilent Infiniium oscilloscope for the probe. The cable has a Kevlar strengthener for added pull strength. The general purpose retractable hook tip is made from a durable music wire and probe tips are replaceable. The 1162A probe comes with a wide range of accessories including an Agilent Browser that installs over the probe tip. The Browser utilizes a crown point pogo pin that digs into solder and absorbs small hand movements, so is less likely to slip. There is also an alligator lead for general purpose probing, 4 spring grounds for high frequency measurements, a socketed ground lead and IC clips for probing surface mount devices. The handle of the probe can be removed, leaving a miniature probe body with a narrow and sharp tip ideal for probing dense circuit boards.