Keysight Q347B Millimeter-Wave Noise Source, Q-band
The Agilent N3306A is a 600 W electronic load module for use in either the N3300A or N3301A electronic load mainframe in system applications. The N3306A load module is fast and accurate, for programming in constant current, constant voltage, or constant resistance modes, or for making voltage, current or power measurements. The N3306A can also digitize waveforms. A single GPIB address is all you need for complete control and read-back of the N3306A load module within a single N3300A or N3301A mainframe. The N3306A electronic load provides fast operation and the accurate programming and read-back needed for high-volume DC power supply test systems.
Keysight N3306A DC Electronic Load Module, 0-60V, 120A, 600 W, for N330X mainframes, 2 slots
The Agilent 87512A transmission/reflection test kits provide the capability to measure the reflection and transmission characteristics of 50 ohm devices up to 2 GHz with an Agilent network analyzer. The test port of the Agilent 87512A is a 50 ohm type N(f) connector. The Agilent 87512A includes precision short/load termination for calibration.
Keithley 2230-30-1 Triple-Output Programmable DC Power Supply w/USB
The Agilent 16760A state and timing module, with its new eye scan feature is the first logic analyzer that displays eye diagrams similar to eye diagrams on an oscilloscope. Eye scan enables you to acquire, display and analyze eye diagrams on hundreds of channels simultaneously without the need to move probes. The 16760’s low-capacitance, high-density probes provide minimum loading of your high-speed parallel buses. In addition, the 16760 makes conventional state and timing measurements, and has differential inputs that can acquire signals at rates up to 1.5 Gbits/s. Its 64 M samples of memory ensure you have the memory needed to troubleshoot complex systems.
Keysight 16760A Timing and State Module
Keysight 34461A Digital multimeter, 6 ½ digit, Truevolt DMM with SEC
SEC = Security Option
The Agilent E3633A is a 160 / 200 W single output, dual range programmable DC power supply designed to meet the most exacting engineering requirements with traditional Agilent quality and reliability.
Unit Calibrated
If calibration expiration is less than 6 months, unit will be re-calibrated.
Re-Calibration can take up to 10 days.
Keysight E3633A 200 W Power Supply, 8 V, 20 A or 20 V, 10 A
Photo and Serial Number may be a like representation, for more detailed information please contact us prior to ordering
The Agilent E4419B is a low-cost, high-performance, dual-channel, programmable power meter. It is fully compatible with the 8480 series and the E-series power sensors (except the E9320A family). Depending upon which sensor is used, the E4419B can measure from -70 dBm to +44 dBm at frequencies from 9 kHz to 110 GHz.
Designed for bench and automatic test equipment use (ATE), the E4419B makes fast (up to 100 readings per second with E-series sensors), accurate and repeatable power measurements.
The E4419B is a true dual-channel power meter, which means that you get two simultaneous power readings on the display.
The Agilent 66000A modular power system simplifies test-system assembly, cabling programming, debugging, and operation. It is ideal for ATE and production test environments, where it can supply bias power and stimulus to subassemblies and final products. The Agilent modular power system saves rack space. The 66000A 7-in high (4-EIA units) mainframe can accommodate up to eight dc power modules.