The Agilent 81101A 50 MHz single-channel Pulse Generator is the economy, entry-level instrument of the 81100 family. All timing parameters (repetition rate, delay, width and transitions) are variable.
The instrument comprises a PLL oscillator that enables the repetition rate to be kept within 0.01% accuracy.
Double-pulses and pulse bursts are available. All pulses can be triggered externally when the PLL is turned off. Bursts can also be triggered by the internal PLL if it is not in use as the repetition-rate generator. An external width (pulse recovery) mode is available, too.
The selectable 50/1000 Ohm source resistance allows output amplitudes up to 10 or 20 Vpp respectively into a 50 Ohm load
The Agilent 66000A modular power system simplifies test-system assembly, cabling programming, debugging, and operation. It is ideal for ATE and production test environments, where it can supply bias power and stimulus to subassemblies and final products. The Agilent modular power system saves rack space. The 66000A 7-in high (4-EIA units) mainframe can accommodate up to eight dc power modules.
The Agilent 86112A provides two accurate measurement channels with user-selectable bandwidths of 12.4 or 20 GHz. The lower bandwidth mode provides excellent oscilloscope noise performance for accurate measurement of small signals. The high bandwidth mode provides high-fidelity display and measurement of very high-speed waveforms.
Keysight 11974Q Preselected Millimeter Mixer, 33 GHz to 50 GHz
The Agilent 11974Q mixer is preselected from 33 to 50 GHz to eliminate the need for signal identification. The Agilent 11974Q mixer is preselected from 33 to 50 GHz to eliminate the need for signal identification. The 11974Q features advanced barium-ferrite technology and comes with a stand-alone power supply. It is especially useful for broadband millimeter signal analysis, electromagnetic interference measurements, and unattended monitoring of millimeter signals.
Keysight 8714ES RF Economy Vector Network Analyzer (S-parameter), 300 kHz to 3 GHz
The Agilent 8714ES RF economy network analyzer provides speed, accuracy and automation features in a compact, integrated instrument for RF component manufacturing, inspection and maintenance.
The Agilent 8714ES features an S-parameter test set with full two-port vector-error correction, providing complete and accurate measurements of device S-parameters. Two independent channels can measure and display two parameters such as S21 (transmission) and S11 (reflection) in a variety of formats including delay and SWR, on retangular, polar or Smith-chart displays. The Agilent 8714ES has a frequency range of 300 kHz to 3 GHz.
The ES models contain a 60-dB source attenuator as a standard feature, giving 70-dB of power-level control for testing active and passive devices. Both 50-ohm and 75-ohm versions are available.
The Agilent 6031A is part of the 603x family of power supplies which provide a wide and continuous range of output voltage and current levels at the rated power output. They provide great flexibility for applications with varied or changing needs.
Agilent HP Keysight 6031A System Autoranging dc Power Supply, 20V, 120A, 1064W
The Agilent E4434B RF signal generator sets a new price-performance level by offering excellent spectral purity and digital modulation capabilities that are ideal for general-purpose research and development, manufacturing or troubleshooting applications. Providing a comprehensive feature set, it generates standard and custom digital modulation formats, filtering and burst shapes, as well as versatile analog modulation, with superior quality, reliability and worldwide support — at an affordable price.
The TCPA300 amplifier, when used with TCP312 probe, provides a wide range of current measurement capability and spans the gap between low level milliamp measurements to very high current levels. These TCP312 probe provides current measurement capabilities of 30A DC continuous. Higher frequency performance is available with the TCP312 w/TCPA300 providing 100 MHz bandwidth and a maximum current of 30A DC. Requires Tektronix TCPA300 Amplifier.
Tektronix TCP312 AC/DC Current Probe, DC to 100 MHz, 30A
OML V12CAL Calibration Kit for WR-12. Compatible with PNA/PNA-X, E836XB/C, 8510B/C, Anritsu 37xxxD Network Analyzers