The Racal Instruments™ 1260-54 is ideal for high-performance RF applications. The tree configuration eliminates the effect of unterminated stubs which would otherwise severely limit bandwidth performance. Unused inputs may be terminated into optional on-board 50 ohm impedances.
The 1260-54 can be used for switching signals to and from oscilloscopes, spectrum, network or distortion analyzers to a unit under test. The module consists of six independent banks of channels configured as 1×4 multiplexers.
Only one connection at a time can be made to each common bus. Unused inputs may be terminated into optional terminators (which must be purchased separately). There is also a fifth, no connect, position for each bank for situations when no signal is required on the common bus.
Relay coil current monitoring is available to provide confidence checking. This gives the user assurance of proper relay operation.
The 1260-54 is controlled by the Option 01 message-based interface.
Read More
The Agilent 34950T is a terminal block for the 34950A and L4450A 64-bit digital I/O. This terminal block is used for discrete wiring. It supports up to 20 AWG wire size typical for <100 connections or 24 AWG for >100 connections. The 34950T is a detachable terminal block with screw-type connections that provides a flexible method for connecting external wiring.
Read More
The Tektronix P6980 is recommended for applications requiring full differential probing with the best signal density and a quick reliable attachment.
Read More
The P6245 Active FET probe achieves high-speed signal acquisition by solving three traditional problems: Lower DUT loading (=1 pF/1 MO probe loading) Direct and easy access to SMDs Access DUT signals and scope bandwidth for TDS600/700/3000/5000/6000/7000* 1 and CSA7000 scopes up to 1 GHz bandwidths The P6245 and P6243 Active probes provide the electrical and mechanical performance required for today’s digital systems designs. No additional power supplies or cables are required when used with TEKPROBE BNC oscilloscopes. Both the P6245 and P6243 achieve high-speed signal acquisition and low circuit loading, required for solving today’s problems faced by designers. The small compact probe head and versatile attachment accessories allow direct connection to the device under test. The P6245 and P6243 Active Probes provide scope bandwidth at the probe tip for the TDS500/600/700; the P6243 provides scope bandwidth at the probe tip for the TDS3000 Series scope up to 1 GHz bandwidth. 1* Some TDS6000 or TDS7000 oscilloscopes require a TCA-BNC adapter. =1.5 GHz Bandwidth (Typical, Probe Only) =1 pF Input Capacitance 1 MO Input Resistance Direct Access to SMDs as Small as 0.5 mm Pitch Measures CMOS, BiCMOS, ECL, GaAs and TTL Logic
Read More
The Fluke OFP-100-S Optifiber Pro OTDR allows for testing and troubleshooting of singlemode fibers at 1310nm and 1550nm wavelengths. Used in conjunction with the DSX-8000 and SmartLoop, the OFP-100-S allows the user to test two fibers with a single test! The Fluke OFP-100-S weekly rental kit consists of the OTDR module and two launch fibers.. The renter can specify the type of connector required. Connector choices include SC, FC, LC, ST, SCAPC or LCAPC.
Must be used in conjunction with the DSX-8000.
Note: Photo shows SC Connector Option and Quad Module
Read More