This VXIplug&play driver is designed for computers operating either Windows® 95 or Windows® NT Version 3.51 or higher. The driver requires a VISA-compatible GP-IB/GPIB interface and the VISA® I/O Library Version 1.1 or higher. Programming with this driver does not depend upon an I/O library specific to your brand of GP-IB/GPIB interface, thus your programming code becomes much more portable.
Read More
16-Channel Form C Switch is a B-size, 1-slot, register-based VXI module. It uses latching armature relays and is capable of carrying 1 Amp of current on a single channel. This versatile general-purpose switch is suitable for switching, scanning, control, or digital output applications. This module contains positions for jumpers or resistors, allowing each channel to optionally connect to internal +5V or +12V supplies for digital output applications. Current on these supplies should not exceed 1A and 0.5A, respectively, per switch. The latching relays ensure all switches will remain in the same position when power is removed. The Agilent E1364A requires a connection into a 96 pin DIN41412 socket that plugs onto the component card.
Read More
The Agilent E1339A 72-channel digital output/relay driver is a B-size, 1-slot, register-based VXI module. Channels can be used (with external pull-up resistors) as digital outputs or as drivers for external relays. All channels are referenced to chassis ground, can sink up to 200 mA each, and can switch voltages up to 32 V. Limited power is available on the module faceplate for powering external devices. An on-board jumper permits either the + 5, + 12, or + 24 V VXI power supplies to be used for powering external devices. Please note that +24 volt power is not available on Agilent B-size VXI mainframes. If +24 volt load power is required in such a case, an external power supply may be used. +24 volt power is available on Agilent C-size mainframes. The downloadable SCPI and VXI plug&play drivers provide open/close commands for individual 72-channel operation or for 36-channel dual output operation (the latter is designed specifically for driving latching microwave relays).
Read More
The New DigiMatic II is an AC Data Logger/Recorder in a stand alone configuration. Data can be viewed in the field via its large self-contained backlit LCD display or can be accessed and downloaded through a personal computer
Read More
The Transistor Devices, Inc. Dynaload DLVP 130-110-1000 is a 1000 Watt load with front panel controls and programming capabilities via rear panel connection.
Read More
The Sorensen DCR80-33B is a high power laboratory or industrial power supply which has an input SCR controlled regulator that provides unparalleled reliability along with regulation and transient response performance suitable for nearly all burn-in and test applications.
Read More
The CSA 803 Communications Signal Analyzer is designed for viewing communication signals up to 50 GHz. Histogram, masking testing, and a colorgraded display are included to form an ideal tool for analyzing eye diagrams. The CSA 803 provides many automatic measurements analyses, including Extinction Ratio, FFT, and Autoset to industry standard Masks. The CSA 803 offers TDR, 10 GHz triggering and 2.0 ps RMS jitter (1.3 ps typical).
Read More
The Tektronix CMC251 Frequency Counter is a multifunction counter which measures the frequency of sine, square, and triangle waves from 1Hz to 1.3GHz. The CMC251 also provides period, totalize and pulse width measurements. The counter has two input channels. Channel A is a standard 1 Mohm input for frequency measurements up to 100MHz. Channel B is a 50 ohms terminated input for use in high-frequency systems. The temperature-compensated, crystal-controlled time base is stable to ±1 part per million per year.
Read More
The Tektronix CFG280 Function Generator produces low distortion sine waves, square waves, triangle waves, TTL sync signals, positive and negative pulses, and ramp waveforms in a frequency range of 0.1 Hz to 11 MHz. You can also directly control amplitude and DC offset. The on-board counter allows the operator to set the frequency output of the function generator precisely. This versatile instrument conserves both bench space and budget.
Read More