Includes Option 001
The Agilent 3458A Multimeter shatters long-standing performance barriers of speed and accuracy on the production test floor, in R&D, and in the calibration lab. The Agilent 3458A is simply the fastest, most flexible, and most accurate multimeter ever offered by Agilent Technologies. In your system or on the bench, the Agilent 3458A saves you time and money with unprecedented test system throughput and accuracy, seven function measurement flexibility, and low cost of ownership.
Select a reading rate of 100,000 readings per second for maximal test throughput. Or achieve highest levels of precision with up to 8.5 digits of measurement resolution and 0.1 part per million transfer accuracy. Add this to the Agilent 3458A’s simplicity of operation, and you have the ideal multimeter for your most demanding applications.
https://4gte.com/index.php/filemanager/datasheet/download/id/201/
Read More
The HP 6236B is a compact constant voltage/current limiting supply combining 0 to ±20V tracking output rated at 0.5A with a single output rated at 0 to +6 volts at up to 2.5 A.
Controls, meters, and binding posts on the HP 6236B series of used power supplies are logically arranged on a neatly laid out front panel.
- DC Output Ratings: Triple Output – 35 Watts
0 to +6V; 2.5A
0 to +20V; 0.5A
0 to -20V; 0.5A - 0 to ±20 V tracking outputs rated at 0.5A with a single output rated at 0 to +6 volts at up to 2.5A
- Independent voltage controls
- Separate dual-range panel meters allow both the voltage and current of any output to be monitored simultaneously
- Input Power: 115 V ac
The Agilent E5385A Samtec probe provides a convenient and reliable connection to your target through a Samtec connector designed into your target. This connector based probe improves upon previous generation connector based logic analyzer probes and offers low loading in a small, surface mount footprint. These probes can be used with a support shroud in environments where accidental unplugging of the probe is a concern. This probe can be used with any Agilent logic analyzer with a 40-pin cable connector.
Read More
Step by step easy navigation with Fiber Break Assistant to guide technician to the break quickly.
Easily understood error messages to help resolve problems quickly.
Traffic detection protects your equipment
Fiber vendor selection table for fool-proof fiber break locator setting
Crisp and clear display of fiber break location
Easy save mode of test results to floppy disk or Flashdisk
Performs key RF, TX and RX measurements
cdma2000 measurements illustrates noise levels, data and voice traffic to identify capacity issues
Built-in average power meter with ±7.5% accuracy
Waveform quality (rho), frequency error, code domain power, timing, and phase analysis
Built-in AWGN source for calibrated E b /N o settings
Network equipment manufacturer (NEM) specific automation software to increase measurement repeatability and enhance technician efficiency
Agilent’s lowest-priced VXI C-size mainframe
Small size/light weight opens new applications for VXI
Basic mainframe monitoring increases measurement confidence
Efficient, quiet cooling improves performance
Compliant with VXIbus Specifications
C-size, 1-slot, message-based commander
Industry standard PC-to-VXI interface
High-performance data block transfers
Ease of configuration with hot plug-in capability
Supports multiple mainframes with one PC
Timing and triggering to external devices/mainframes
The Agilent/HP J6801A DNA hardware platform brings greater power for collecting and analyzing real-time data over multiple technologies such as Ethernet, ATM, POS, Frame Relay, IPv6, MPLS, VoIP, IPTV, HSDPA, HSUPA, UMTS, CDMA 2000, GPRS, etc. The scaleable DNA hardware platform provides the foundation of advanced protocol analysis architecture for fixed and mobile network application. Couple the hardware with the Network Analyzer software application and you have a powerful wireline solution for LAN and WAN networks; couple the DNA platform with the Triple Play Analyzer software for IPTV, VoD, VoIP QoE analysis. Similarly, use the hardware in conjunction with Signaling Analyzer software to create an advanced mobile network analysis solution for 2G, 2.5G and 3G technologies.
Read More
FEATURES
Designed specifically for Agilent microwave system amplifiers
Bias Cable permits remote placement
Compact size for easy system integration
DC Output Voltage/Current
+12 V at 2.0 A, -12 V at 200 mA
Output Power: 25 W, maximum