The Agilent U11644A calibration kit contains the precision mechanical standards required to calibrate the systematic errors of Agilent network analyzers. This calibration kit has a precision airline for performing the Thru-Reflect-Line (TRL) calibration, the most accurate error-correction technique for coaxial measurements. This kit also contains flush short circuit, a precision shim, and a fixed termination.
Read More
The Agilent 60504B module along with the dc electronic load mainframe are ideal for the test and evaluation of dc power sources and power components and are well suited for applications in areas such as research and development, production, and incoming inspection. Each module includes programming inputs that allow control of load current via an analog control voltage.
Read More
Agilent E5281A Medium Power Source/Monitor Unit Module
E5281A Medium Power source/monitor unit (MPSMU) for E5270A Parametric Measurement Mainframe only. The medium power source monitor units will provide up to 20 milliamps of current at ±100 volts and 100 milliamps of current at ±20 volts (200 mA for the E5281A). Up to 8 MPSMUs can be used at one time in the E5270A and E5270B mainframes. Since SMUs characteristic may vary with version, see manual for complete measurement and force ranges specifications such as resolution and measurement accuracy.
Read More
The Agilent 16760A state and timing module, with its new eye scan feature is the first logic analyzer that displays eye diagrams similar to eye diagrams on an oscilloscope. Eye scan enables you to acquire, display and analyze eye diagrams on hundreds of channels simultaneously without the need to move probes. The 16760’s low-capacitance, high-density probes provide minimum loading of your high-speed parallel buses. In addition, the 16760 makes conventional state and timing measurements, and has differential inputs that can acquire signals at rates up to 1.5 Gbits/s. Its 64 M samples of memory ensure you have the memory needed to troubleshoot complex systems.
Keysight 16760A Timing and State Module
Read More
The Agilent 54712A is a 1.1GHz Amplifier Plug-in. The unit features a 50-ohm input and internal trigger, 2Gsa/sec. max. The 54712A is designed for use with the 54720D Oscilloscope.
Read More
The Agilent E5386A half-channel adapter is intended to be used with the Agilent 16760A Logic Analyzer in half-channel state mode. The E5386A also works with the Agilent E5378A 100-pin single-ended probe and the E5379A 100-pin Samtec differential probe.
Read More
The Agilent E5379A Samtec probe provides a convenient and reliable connection to your target through a Samtec connector designed into your target. This connector based probe improves upon previous generation connector based logic analyzer probes and offers low loading in a small, surface mount footprint. These probes can be used with a support shroud in environments where accidental unplugging of the probe is a concern. This probe can be used with any Agilent logic analyzer with a 90-pin cable connector.
Read More
The 44725A Switch is a 16-Channel general purpose switch that directly switches voltage, current, and power. This plug-in module is designed for use with the 3852A Data Acquisition and Control Unit.
Read More