The Agilent 11906C adapter kit is available to provide connections between 7-16 connectors and 7 mm connectors. The female 7-16 connectors in these kits feature special retracted threads that do not compress the gasket when connecting to a general-purpose 7-16 connector. This allows the connectors to be properly mated with only 20 in-lbs (1.6 ft-lbs) of torque, instead of the usual 18.5 to 22 ft-lbs of torque, reducing the possibility of damaging the test ports of a network analyzer. Modern wireless communication systems require high-performance components offering low VSWR and low intermodulation distortion at high transmit power levels. To meet these needs, 7-16 connectors are becoming increasingly common in base station transmitters, amplifiers, duplexers, and other products. These connectors conform to IEC 169-4, DIN 47223, European standard EN 122190, and British standard BSEN 122190.
Read More
The Agilent 11904C is a metrology grade, 2.4 mm male to 2.92 mm female adapter with dc to 40 GHz operation. It is 13.3 mm in length and has a diameter of 9 mm.
Read More
The Agilent 11903C is a metrology-grade, 2.4 mm male to type-N female adapter with dc to 18 GHz operation.
Read More
See the Anoison PA5122C for alternate.
The Agilent 11903B is a metrology grade, 2.4 mm female to type-N female adapter with dc to 18 GHz operation.
Read More
The Agilent 11903A is a metrology-grade, 2.4 mm male to type-N male adapter with dc to 18 GHz operation.
Read More
The Agilent 1165A minature passive probe is a small, rugged, general purpose probe for use with the 54830B/D, 54831B/D and 54832B/D Infiniium oscilloscopes. It is fully compatible with the Agilent Auto-Probe interface which completely configures the Infin
Read More
The Agilent 1164A miniature passive probe is a small, rugged, general purpose probe for use with the Agilent 54810A, Agilent 54815A, Agilent 54820A and Agilent 54825A Infiniium oscilloscopes. It is fully compatible with the Agilent AutoProbe interface which completely configures the Agilent Infiniium oscilloscope for the probe. The probe is built and tested for high reliability and comes with a 3 year warranty. The cable has a Kevlar strengthener for added pull strength. The general purpose retractable hook tip is made from a durable music wire and probe tips are replaceable. The Agilent 1164A probe comes with a wide range of accessories including an Agilent Browser that installs over the probe tip. The Browser utilizes a crown point pogo pin that digs into solder and absorbs small hand movements, so is less likely to slip. There’s also an alligator lead for general purpose probing, 4 spring grounds for high frequency measurements, a socketed ground lead and IC clips for probing surface mount devices. The handle of the probe can be removed, leaving a miniature probe body with a narrow and sharp tip ideal for probing dense circuit boards.
Read More
The Agilent 1163A Miniature Passive probe is a small, rugged, resistive divider probe for use with the all Agilent Infiniium oscilloscopes. It is fully compatible with the Agilent AutoProbe interface which completely configures the Agilent Infiniium oscilloscope for the probe. The probe is built and tested for high reliability and comes with a 3 year warranty. The cable has a Kevlar strengthener for added pull strength. The general purpose retractable hook tip is made from a durable music wire and probe tips are replaceable. The 1163A probe comes with a wide range of accessories including an Agilent Browser that installs over the probe tip. The Browser utilizes a crown point pogo pin that digs into solder and absorbs small hand movements, so is less likely to slip. There is also an alligator lead for general purpose probing, 4 spring grounds for high frequency measurements, a socketed ground lead and IC clips for probing surface mount devices. The handle of the probe can be removed, leaving a miniature probe body with a narrow and sharp tip ideal for probing dense circuit boards.
Read More
The Agilent 1162A Miniature Passive probe is a small, rugged, general purpose probe for use with all Infiniium oscilloscopes. It is fully compatible with the Agilent AutoProbe interface which completely configures the Agilent Infiniium oscilloscope for the probe. The cable has a Kevlar strengthener for added pull strength. The general purpose retractable hook tip is made from a durable music wire and probe tips are replaceable. The 1162A probe comes with a wide range of accessories including an Agilent Browser that installs over the probe tip. The Browser utilizes a crown point pogo pin that digs into solder and absorbs small hand movements, so is less likely to slip. There is also an alligator lead for general purpose probing, 4 spring grounds for high frequency measurements, a socketed ground lead and IC clips for probing surface mount devices. The handle of the probe can be removed, leaving a miniature probe body with a narrow and sharp tip ideal for probing dense circuit boards.
Read More