Includes Option 10G
The 80A05 Electrical Clock Recovery Modules enable clock recovery for electrical signals. Additionally, the 80A05 provides internal routing of the recovered clock for triggering of the 8200.
The 80A05 provides high level of integration and the best sensitivity available, and is the optimal solution for testing of optical transmitter components and electrical components of optical systems. The 80A05 PLL loop bandwidth selection is automatic with no interaction, leading to easy setup and operation.
HP/Agilent 44708A, 44708A Card with CONNECTOR BLOCK
HP/Agilent E1330B Quad 8-Bit Digital I/O VXI Module, B-Size BOARD ONLY
The TLA7Q4 is the 136- Channel Logic Analyzer module with 2 GHz timing, 100 MHz state and 64 M depth. This module offers high-speedstate synchronous capture and high-speedtiming capture through the same set of probes. It capitalizes on MagniVu technology to offer 500 ps timing on all channels, glitch and setup/hold triggering and display, and time stamp that is always on at up to 500 ps resolution. The TLA7Q4 is ideal for timing analysis, multi-process or bus applications, and embedded software analysis.
The Agilent 34903A is a general-purpose switch module for the 34970A Data Acquisition/Switch Unit. It has 20 independent single-pole, double-throw (SPDT) relays and is used to cycle power to products under test, control indicator and status lights, and to actuate external power relays and solenoids. Combine it with matrix and multiplexer modules to build custom switch systems. Its 300 V, 1 A contacts can handle up to 50 W, enough for many power line switching applications
The HP/Agilent 83494A single-mode clock recovery plug-in module is an integrated solution for high-speed digital transmission test. When a separate trigger source is not available, the 83494A can derive a timing reference directly from the signal under test. The 83494A can synchronize to all SONET/SDH transmission rates through 10 Gb/s with exceptional jitter performance that ensures an accurate display of the test waveform.
The Agilent 70820A microwave transition analyzer module is a two-channel sampler-based time-domain instrument for making stimulus-response measurements from dc to 40 GHz. It makes CW and pulse-RF measurements, specializing in measuring fast magnitude and phase transitions. It is ideal for characterizing components and systems in a benchtop environment. You can measure magnitude and phase settling times, rise and fall times, time delay, peak and average power, group delay, AM to PM conversion, analysis of AM, FM, and PM on RF carriers and much, much more. All functions of the Agilent 70820A are programmable. In addition, custom application-specific interfaces can be developed for Agilent Instrument BASIC and run internally. This use of IBASIC eliminates the need for an external controller in many applications.
The HP/Agilent 34924A module for the 34980A Multifunction Switch/Measure Unit is a high-density, high-speed multiplexer for general purpose scanning. It uses reed relays to achieve scan rates up to 500 channels-per-second. Use this module for high-throughput automated test applications as well as high-speed data logging and monitoring tasks.
2- and 4-wire channels may be mixed on the same module. Standard 78-pin Dsub connectors allow for use with standard cables, terminal blocks, or mass interconnect solutions.
Keysight 34922A 70-Channel Armature Multiplexer for 34980A with 34922T Terminal Block
The HP/Agilent 34922A module for the 34980A Multifunction Switch/Measure Unit offers high density multiplexer switching in a compact size. It combines dense, multi-function switching with 100 channel/second scan rates to address a broad spectrum of data acquisition applications.
Current measurements can be accomplished with user provided shunt resistors. Standard 78-pin Dsub connectors allow for use with standard cables, terminal blocks, or mass interconnect solutions.