Keysight 8757C Scalar Network Analyzer
- 76 dB dynamic range
- Accurate swept power measurements
- 40 dB directivity bridges
- 40 GHz in coax, 110 GHz in waveguide
- Buffered plotter/printer output
- External disk and internal register save/recall
- Limit testing built in
- Precision color display
The Agilent HP Keysight 6654A is one of the 665x series of 500 Watt, single output, series pass regulated power supplies, with an internal GPIB interface and SCPI programming. These models provide many talker/listener functions including remote programming of voltage and current with feedback of actual measured output values. 16 supplies can be connected to one GPIB interface via a serial link connection.
Keysight 6654A 500 Watt System Power Supply
Read More
Industry First: Eight-port ATM IMA on a portable platform with hot-swappable interfaces
Lowest cost per port for ATM IMA analysis
2G/2.5G/3G channelized eight-port analysis for the Agilent Signaling Analyzer
Eight-port E1/T1 passive monitoring taps available for convenient and efficient connections to a network
The J6824A LIM can be configured to operate with T1 (1.5 Mb/s) or E1 (2 Mb/s) line rate with DS1 or E1 framing, respectively, at RJ-48C 8-pin connectors, suitable for balanced 100 Ohm T1 or 120 Ohm E1 interfacing, or unbalanced 75 Ohm E1 interfacing
Cable options provide 8 dual Bantam connector cables terminated in an RJ48C plug; or 8 dual 75 Ohm BNC connector cables terminated in an RJ48C plug; or 8 balanced cables which swap cable pairs between RJ48C pins [1,2]/[4,5] to RJ45 pins [5,4]/[6,3]
Real-time simultaneous AAL-2 or AAL-5 reassembly on more than 4000 ATM virtual channels (user controls which)
ATM Policing, Traffic Contract Estimation and 1-point CDV on multiple virtual circuits simultaneously
The DG2040 pattern generators provide digital designers with the high performance tools needed to evaluate advanced digital components and logic circuits. Whatever you call your design process – characterization, debug, validation or verification – as a digital designer you must have a state-of-the-art digital pattern generation as you push the edge of the technology envelope and race to market.
Read More
Keysight 34970A Data Acquisition Switch Unit
The Agilent 34970A consists of a three-slot mainframe with a built-in
6 ½ digit DMM. Each channel can be configured independently to
measure one of 11 different functions without the added cost or hassles
of signal-conditioning accessories. Choose from eight optional plug-in
modules to create a compact data logger, full-featured data acquisition
system or low-cost switching unit. On-module screw-terminal connections
eliminate the need for terminal blocks and a unique relay maintenance
feature counts every closure on every switch for easy, predictable relay
maintenance.
Weekly Rental – Please contact us today to set up your rental terms. 1-866-409-0400 or sales@4gte.com
The Fluke OFP-100-Q Quad Optifiber Pro OTDR allows for testing and troubleshooting of multimode or singlemode fibers at 850nm, 1300nm, 1310nm or 1550nm wavelengths. Used in conjunction with the DSX-800 and SmartLoop, the OFP-100-Q allows the user to test two fibers with a single test! The Fluke OFP-100-Q weekly rental kit consists of the OTDR module and six launch fibers.. The renter can specify the type of connector required. Connector choices include SC, FC, LC, ST, APCSC or APCLC.
Must be used in conjunction with the DSX-8000.
Note: Photo shows SC Connector Option and Quad Module
Read More
The Tektronix TPA-BNC Adapter enables existing TekProbe® interface products (active, differential, high voltage, current and optical probes) to be used with Tektronix’ newest generation of DPO7000 and DPO4000 Series Oscilloscopes which feature the new TekVPIâ„¢ probe interface architecture. Existing TekProbe-BNC probe types simply plug into the TPA-BNC adapter which is then plugged directly into any TekVPI probe channel of the DPO7000 and DPO4000 Series oscilloscopes. The TPA-BNC adapter recognizes and supplies the necessary power and serial communication and offset control as used by the connected TekProbe product accessory
Read More
Tektronix 2465A CT Oscilloscope, includes 10073C Probe and Power Cord
The TEKTRONIX 2465A, 2455A, ano 2445A portable oscilloscopes have four
vertical channels with DC to 350 MHz, 250 MHz, and 150 MHz bandwidths.
Deflection factors run from 2 mV to 5 V per division, in a 1-2-5 sequence, with either
1 Mn or 50 n input resistance, in channels 1 and 2. Either AC or DC input coupling is
available at 1 Ma. Channels 3 and 4 give 0.1 V or 0.5 V per division, with 1 Mf! input
resistance, and DC coupling. With the standard 10X probes, channels 1 and 2 display
20 mV to 50 V/division and channels 3 and 4 display 1 V or 5 V/division.