The Tektronix 80E04 is a dual-channel Time Domain Reflectometry (TDR) sampling module. This sampling module provides an acquisition rise time of 17.5 ps or less, with a typical 20 GHz equivalent bandwidth. Each channel of the Tektronix 80E04 is capable of generating a fast step for use in TDR mode and the acquisition portion of the sampling module monitors the incident step and any reflected energy. The reflected rise time of the TDR step is 35 ps or less and the polarity of each channel’s step can be selected independently. This allows for differential or common-mode testing of two coupled lines, in addition to the independent testing of isolated lines. The Tektronix 80E04 characterizes crosstalk by using the TDR step to drive one line while monitoring a second line with the other channel. The “filter” function on the CSA8000/TDS8000 can be used with TDR or crosstalk measurements to characterize expected system performance with slower edge rates.
Read More
The 80E03 is a dual-channel, 20 GHz sampling module. This sampling module provides an acquisition rise time of 17.5 ps or less.
Read More
The Boonton 56518 Peak Power Sensor for Boonton 4400, 4500, 4400A, and 4500A RF Peak Power Meters and 4530 Series RF Power Meter when combined with Model 2530 1 GHz calibrator accessory.
Read More
Provides the span power necessary and the ability to access a T1 span at the main distruibution frame(MDF). Satisfies pre-installation HDSL Loop Test requirements for signal quality for network equipment. Verifies that cable pairs can support HDSL traffic,the doubler is working/installed properly, and can perform a bit error rate test on the span when used with TTC T209OSP.
Read More
The 8211 modulation meter is a microprocessor based high performance AM and FM modulation measuring instrument covering carrier frequency range from 2MHz to 1.5GHz.
Read More
The Data Precision 8200 calibrator is a microprocessor-controlled, precision 6.5 digit, voltage and current standard. The 8200 provides a completely isolated analog signal from 0.1 uV to 100 VDC (1000 VDC optionally) or 1 uA to 100 mADC for the testing and calibration of high precision analog circuits. Unlike conventional decade switches, the 8200 has full carry and borrow control of the output selection dials. It is no longer necessary to change a decade setting back to zero to increment the next higher decade by one. The microprocessor automatically interprets the decade setting, checks for validity, and adjusts the output. Basic voltage accuracy is 10 ppm + 1ppm of full scale range.
Read More
The 80E02 is a dual-channel, 12.5 GHz sampling module specifically designed for low-noise measurements in digital communications and device characterization applications. It provides an acquisition rise time of 28 ps and typically 400 µV RMS of displayed noise.
The 80E02 is the ideal instrument for low-noise applications. Common applications for the 80E02 are capturing and displaying switching characteristics of high-speed communications circuits, making accurate statistical measurements of signal noise and signal timing jitter, or obtaining stable timing measurements of fast digital ICs.
Read More
The Marconi 6960 RF Power Meter is a high accuracy instrument which together with its associated power sensors provides measurements at frequencies from 30 kHz up to 46 GHz over a wide range of power levels. Its numeric keyboard enables easy manual control while full GPIB implementation (option 001) with SRQ mask and trigger modes make it the logical choice for fast ATE systems.
Read More
The 4530 series RF Peak Power Meter can make Peak, CW Power and RF Voltage measurements at high speed from 10 Hz to 40 GHz.
Read More