Agilent E5281A Medium Power Source/Monitor Unit Module
E5281A Medium Power source/monitor unit (MPSMU) for E5270A Parametric Measurement Mainframe only. The medium power source monitor units will provide up to 20 milliamps of current at ±100 volts and 100 milliamps of current at ±20 volts (200 mA for the E5281A). Up to 8 MPSMUs can be used at one time in the E5270A and E5270B mainframes. Since SMUs characteristic may vary with version, see manual for complete measurement and force ranges specifications such as resolution and measurement accuracy.
Read More
The Agilent N6733B is a 50 W basic DC power module that provides programmable voltage and current, measurement and protection features at a very economical price, making these modules suitable to power the DUT or to provide power for ATE system resources such as fixture control. This module is used in both the small, multiple output 1U high N6700 Low-Profile Modular Power System (for ATE systems) and the multiple output N6705 DC Power Analyzer (for bench testing). GPIB, LAN, USB, and LXI Class C compliance are standard. Select from more than 20 different DC power modules, ranging in capability from basic to high precision, and in power from 20 – 300 W.
Read More
Agilent 8481H Power Sensor, 10 MHz to 18 GHz, -10 to +35 dBm
The Agilent 8481H thermocouple power sensor is designed for use with the E4418B, E4419A, 70100A, E1416A and the 436A, 437B, 438A power meters, and provides extraordinary accuracy and stability. The 8481H power sensor gives you extremely low SWR and is traceable to the U.S. National Institute of Standards and Technology (NIST). A calibration port is included with the above power meters for calibration with the power sensor. This calibration provides traceability to NIST and it eliminates the uncertainties due to temperature changes and the variance in making measurements with different meter/sensor combinations. For Wide Dynamic Range Power Measurements to +30 dBm, the E-series E9301H Average Power Sensor is recommended.
Read More
Keysight manual step attenuators offer fast, precise signal-level control up to 26.5 GHz. Attenuation range of 121 dB in 1 dB step can be achieved by cascading 2 attenuators in series.
Read More
The HP/Agilent Keysight 34921A module for the 34980A Multifunction Switch/Measure Unit is the most versatile multiplexer for general purpose scanning. It has low thermal offset characteristics and a built-in thermocouple reference on the terminal block, making it ideal for temperature measurements directly to the internal DMM. The dense, multi-function switching with 100 channel/second scan rates addresses a broad spectrum of data acquisition applications.
Four additional fused inputs (44 channels total) route up to 1A of current to the internal DMM, allowing AC and DC current measurements without the need for external shunt resistors. Standard 50-pin Dsub connectors allow for use with standard cables, terminal blocks, or mass interconnect solutions.
Photo and Serial Number may be a like representation, for more detailed information please contact us prior to ordering.
Read More
The Agilent Q85026A waveguide detector offers a frequency range of 33 to 50 GHz and is for use with the Agilent 8757 only in either ac or dc detection mode.
Read More
Colby Instruments PG5000A. Colby Instruments PG5000A 10 MHz to 5000 MHz Dual Output Pulse Generator. Type N input for sine wave. Dual output type SMA connectors. Digital display of output offset and amplitude.
Read More