The 11664B Detector was designed specifically for use with the 8755C Swept Amplitude Analyzer. The 11664B detects the envelope of the 27.8 kHz modulated microwave signal. It uses a biased Schottky diode to achieve -50 dBm sensitivity.
Read More
The 11664A Detector was designed specifically for use with the 8755C Swept Amplitude Analyzer. The 11664A detects the envelope of the 27.8 kHz modulated microwave signal. It uses a biased Schottky diode to achieve -50 dBm sensitivity.
Read More
The Agilent 1144A active probe provides an excellent combination of high bandwidth, high input resistance, and low input capacitance. This combination is superior to that of passive divider probes because it provides minimal circuit loading at high and low frequencies. As signal speeds increase, passive divider probes may not deliver the performance needed. This can result in waveshapes that do not represent the actual signal. To help you minimize circuit loading, the Agilent 1144A boasts a 800 MHz bandwidth, 1 M Ohm input resistance, and 2 pF input capacitance. It can be connected to any instrument with 50 Ohm inputs. An external 50 Ohm termination can also be used with high impedance inputs. For use with 6000 Series 300 MHz – 1 GHz, 54641A/D and 54642A/D oscilloscopes the Agilent 01144-61604 adapter can be used with this power supply to provide power for two channels of active probing. Versatile accessories allow for easy connection to your device under test. For example, the dual lead adapter combines with the two mini-pincher tips to provide a solid connection to 0.050 inch pitch surface mount devices for hands-off probing. Also, the ground bayonet has a short ground lead to minimize measurement errors such as ringing, caused by parasitic inductances. For hands-off probing of SMT components with 0.5 mm (0.020 inch) to 0.8 mm (0.032 inch) pitch, an additional accessory is available: the Agilent 10075A 0.5 mm IC Clips Accessory Kit.
Read More
The 1040L RF amplifier provides 400 watts from 10-500KHz. It is a quasi linear class B design. It has a nominal 55 dB gain and will operate up to 1 MHz at reduced power gain. The unit sits in a standard 19″ rack mount 3U high. It has an intergral power supply capable of operation at 115 or 220 VAC, 50-60 Hz.
Read More
The Agilent 10070 family probes are rugged, general-purpose probes designed to operate with the Agilent 54600 family of oscilloscopes. This family provides a range of high-quality probing solutions at a very reasonable price.
Read More
8000 Series Sampling Oscilloscopes configured with the 80E06 – 70+ GHz Electrical Sampling Module – allow users to characterize high-speed devices and circuits. This module’s ultra-high bandwidth, coupled with its low noise, provides world-class signal fidelity in the acquired signal. The front panel connector is female 1.85 mm which includes a precision adapter to 2.92 mm with a 50 Ohm SMA termination.
Read More
The Tektronix 80E04 is a dual-channel Time Domain Reflectometry (TDR) sampling module. This sampling module provides an acquisition rise time of 17.5 ps or less, with a typical 20 GHz equivalent bandwidth. Each channel of the Tektronix 80E04 is capable of generating a fast step for use in TDR mode and the acquisition portion of the sampling module monitors the incident step and any reflected energy. The reflected rise time of the TDR step is 35 ps or less and the polarity of each channel’s step can be selected independently. This allows for differential or common-mode testing of two coupled lines, in addition to the independent testing of isolated lines. The Tektronix 80E04 characterizes crosstalk by using the TDR step to drive one line while monitoring a second line with the other channel. The “filter” function on the CSA8000/TDS8000 can be used with TDR or crosstalk measurements to characterize expected system performance with slower edge rates.
Read More
The 80E03 is a dual-channel, 20 GHz sampling module. This sampling module provides an acquisition rise time of 17.5 ps or less.
Read More
The Boonton 56518 Peak Power Sensor for Boonton 4400, 4500, 4400A, and 4500A RF Peak Power Meters and 4530 Series RF Power Meter when combined with Model 2530 1 GHz calibrator accessory.
Read More