The 70600A provides optional preselection for the 71200C microwave spectrum analyzer. A preselector eliminates the image and multiple responses generated by the harmonic mixing technique used in the spectrum analyzer. A built-in attentuator in the preselector provides overload protection and allows you to set the proper input level to the 70905A/B RF Section for optimum dynamic range.
Read More
The Agilent 70428A microwave source module can add microwave source capacity to your MMS system if four slots in the system are available. The Agilent 70428A microwave source module makes an excellent substitute LO for your radar system, phase noise measurement system, or test source for microwave receiver testing. It provides the lowest AM phase noise of any commercially available microwave source and provides up to +16 dBm of output power. The Agilent 70428A requires either the Agilent 70001A mainframe or the Agilent 70004A display.
Read More
The Agilent 70427A microwave downconverter module translates microwave signals to RF frequencies for use with the 3048A phase noise measurement system. The 70427A provides state-of-the-art noise floor performance for microwave phase noise measurements. In addition, it provides specified spurious performance and a dc-coupled tuning port with variable sensitivity for phase locking to your microwave source. The 70427A microwave downconverter module is a component of the 71707A, which also includes and 70004A color display/mainframe.
Read More
The Agilent 70422A Microwave Downconverter Module is part of the 70000 modular measurement system (MMS). The microwave downconverter translates microwave signals to RF frequencies with minimal phase and AM noise contribution. The 70422A Microwave Down converter is a low noise four-slot MMS module with a frequency range of 1 to 18GHz.
Read More
The Agilent 70420A is a MMS Baseband Phase Noise Test Set that contains phase detectors and phase-lock loop circuitry. The unit is a 50kHz to 1.6GHz carrier frequency four-slot MMS module. This unit is used as the Phase Noise Test Set for the E550xx systems. Option 201 extends the frequency range to 26.5 GHz.
Read More
An Agilent 70300A RF tracking generator adds stimulus-response measurements to an Agilent 70000 series spectrum analyzer, enabling accurate characterization of gain, frequency response, isolation, and return loss. The wide dynamic range (>124 dB with 70300A and 71100C) makes accurate measurements of filter rejection and switch isolation without the need for time-consuming averaging. The system has very high selectivity, with resolution bandwidths as narrow as 10 Hz. High selectivity allows measurements in the presence of other signals-a key advantage when measuring LO-to-RF isolation of a mixer or the return loss of an active antenna system. Unlike a point-by-point measurement system, the Agilent 70000 scalar system sweeps quickly and provides continuous data. The system is controlled using Agilent 70871A scalar personality.
Read More
The Agilent 70205A graphic display is a 3-slot wide module that is ideally suited for applications in which space, size, and weight requirements are stringent. It is small yet gives full control of the modular instruments in your system. Softkeys organized in a menu structure establish an interactive front panel for the modular instrument. Results from up to four independent measurement systems may be shown and simultaneously updated on a single display, and one display may be used to control multiple systems. Without a display in the system, a computer must be used to control the instruments. The display can be separated from the MMS instruments by up to 1 kilometer of MSIB cable for use as a remote manual interface.
Read More
The Agilent/6220B power supply is designed for general laboratory use. The 6220B has excellent regulation, low ripple and noise, and high speed programming characteristics. Large easy-to-read meter scales, 10-turn voltage and current controls, and front and rear output terminals, enhance ease of operation.
Read More
The Agilent/6216A power supply is designed for general laboratory use. The 6216A is equipped with front-panel mounted voltage controls, a combination volt/ammeter, and output binding posts. Output voltage is continuously variable, via coarse and fine voltage controls, from 0V to 15% above the maximum rated output. A meter function switch selects either output voltage or current for display on the panel meter.
Read More