The Agilent 85099C RF electronic calibration (ECal) module makes calibration of vector network analyzers fast, easy, and accurate. ECal is a precision, single-connection calibration technique for your vector network analyzer. Performing a full two-port calibration takes less than half the time and number of connections using ECal versus mechanical cal kits. Furthermore, the accuracy of the calibration is comparable between electronic and mechanical methods. Traditional mechanical calibrations require intensive operator interaction, which is prone to errors. With ECal, the operator simply connects the ECal module to the network analyzer and the software controls the rest.
ECal modules are transfer standards capable of transferring the factory calibration accuracy to your network analyzer. The new 85099C RF electronic calibration system is now easily controlled by one of two methods depending on the network analyzer. The Agilent PNA and ENA series of network analyzers controls the module directly through a USB interface. The Agilent 8753E/ES/ET network analyzers require an 85097B interface kit to control the module.
Read More
The Agilent 8508A vector voltmeter is a fully automatic tuned receiver that makes RF voltage and phase measurements easy. Its narrowband measuring technique gives a dynamic range of over 90 dB and a sensitivity of 10 micro V to trace even the smallest signal. This vector voltmeter also measures the phase difference between its two input channels with at least 0.1 degree resolution over a full +180 to -180 degree range, so they can be used for another complete set of measurements – such as electrical length, phase distortion, or impedance.
Read More
Remote controlled signal generator with remote frequency trim and base levelling. Outstanding noise and distortion characteristics.
NOTE: This product must ship on a pallet.
Read More
THIS PRODUCT IS NOT CURRENTLY IN STOCK
These models are movable short circuits with dedicated connectors in precision air lines. The inherent low reflection and accurate transmission line of these instruments, coupled with efficient beryllium copper inner and outer conductor contacting fingers, provide an excellent short circuit. The travel of the shorting plane of these instruments is at least 1/2 wavelength at the lowest rated frequency to permit reversal of the reflection phase
Read More
The Anritsu MA2460B/C series power sensor has a video bandwidth of 1.25 MHz. When used with the ML2407A (single channel) or ML2408A (dual channel) power meters, it is able to correctly characterize IS-95 waveforms and accurately measure average power. Advanced signal processing with fast sampling speeds facilitate measurements of peak power and crest factor. Triggering for pulse analysis is from a TTL input or from a rising or falling edge. Variable trigger delay provides the ability to view the whole pulse profile or exactly the portion of the pulse of interest. With the ML2408A dual channel power meter, the pulsed gain of an amplifier can be measured directly.
Read More
Capacity: 440 grams
Resolution 0 – 40 g X 0.001 g / 40 – 440 g X 0.01 g
Removable Draft Shield w/ Removable Lid
Single touch Zero / Tare bar
Made in Switzerland
On/Off via Tare bar. Main power switch on back
Inputs for remote zero/tare
120 VAC 60 Hz
The industry standard for MTS test and measurement. Certified compliance to BTSC standards can be used with any TV stereo generator. Provides four modes of operation. Maintains performance with varying temperature.
SRD-1 sets the standard for precision MTS test and measurement. The SRD-1 stereo reference decoder is the most accurate monitor on the market. It works with test equipment your station probably already owns, so it costs less than other, less precise test equipment.
Modulation Sciences has designed the SRD-1 with painstaking detail and individually calibrates each production model in basic units: voltage, frequency and phase. Verifying the original calibration requires only an audio oscillator, frequency counter and an accurate AC digital voltmeter.
Station personnel can calibrate the SRD-1 to verify its performance to BTSC Recommended Practices (Appendix D). When an SRD-1 is used to calibrate any television stereo generator, it provides traceability to the BTSC standards.
Read More
The B series of Signal Generator Family R&S SMIQ for analog and digital modulation from Rohde & Schwarz offers solutions for today and tomorrow. In particular, this series takes into account future developments in the field of 3rd-generation digital mobile radio.
Read More