The MS46522A is a series of 2-port RF ShockLine™ Vector Network Analyzers with frequency range from 50 kHz to 4.5/8.5 GHz. The MS46522A series of low cost VNAs are packaged in a compact and rugged 2U chassis. With 70 microseconds per point sweep speed, and better than 110 dB dynamic range, these VNAs are suitable for a variety of passive device test applications to 8.5 GHz in simple engineering, production and education applications.
ShockLine™ VNAs integrate easily into rack-mount test systems due to small size and remote programmability. They support SCPI command programming and software drivers for the most common programming environments. The whole family uses industry standard LAN communications for remote control. ShockLine™ VNAs provide a powerful graphical user interface for manual testing of devices. The full-featured user interface is enabled by attaching a (user-supplied) touchscreen monitor, keyboard, and mouse.
The MS46322A is a series of Economy ShockLine™ Vector Network Analyzers with frequency range from 1 MHz to 4/8/14/20/30/40 GHz. It is based on patented shock line VNA-on-chip technology, which simplifies the internal VNA architecture at high frequencies, reduces instrument cost, and enhances accuracy and measurement repeatability.
The MS46322A are all 2-port VNAs packaged in a compact and rugged 2U chassis. The entire series has 220 microseconds per point sweep speed, and better than 100 dB dynamic range to 40 GHz, making it suitable for testing passive devices in engineering, manufacturing and cost-sensitive education applications.
ShockLine™ VNAs integrate easily into rack-mount test systems due to small size and remote programmability. They support SCPI command programming and software drivers for the most common programming environments. The whole family uses industry standard LAN communications for remote control. ShockLine™ VNAs provide a powerful graphical user interface for manual testing of devices. The full-featured user interface is enabled by attaching a (user-supplied) touchscreen monitor, keyboard, and mouse.
The field-portable HP E4487A CERJAC 156MTS combines SONET, ATM and T-carrier testing for installation, qualification, and maintenance testing from STS-1 electrical to DS0. The instrument provides a wide array of options to support evolving network measurement needs. “Auto” and “Troublescan” capabilities quickly synchronize with complex network configurations to report errors on a high-contrast display. A full suite of BER test patterns with alarm, error, and pointer monitoring and generation capability is included for T-carrier, clear-channel, and ATM payloads.
Read More
The HP 37701B T1 Datacom Tester offers you a complete measurement solution for the installation and maintenance of T1, fractional T1 and datacom circuits and services in a single, portable box. In addition to the telecom measurements of the HP 37701B, you can add datacom capability to the tester by attaching the datacom module (HP 15901A Option 002). This module includes interfaces for RS-232-C, RS-449 and V.35 for rates up to 1.544 Mb/s, using its built-in synthesizer. An RS-232-C break-out box and control-circuit timing analysis help you identify interface faults.
Option 001
Read More
The Agilent HP Keysight 54501A is a 4 channel, 100MHz digitizing oscilloscope designed primarily for repetitive signal applications. It features 2-channel simultaneous sampling, ease of use, dual time base windowing, advanced logic triggering, automatic measurements, and full GPIB programmability
Read More
The Sorensen DLM 3kW and 4kW Series programmable DC power supplies are designed to provide highly stable, continuously variable output voltage and current for a broad range of applications in a compact 2U ( 3½” high) chassis.
Both the 3 kW and 4 kW models have output voltages from 0-5 VDC to 0-600 VDC and a current range from 0-5A to 0-450A. The output rms noise is as low as 10 mV. The output will recover to 1% of its steady-state voltage within 1 ms for a step load change of 100% to 70% or 70% to 100%. The front panel layout makes the series extremely easy to use. Control switches include: power on, enable/ standby and local/ remote.
Displays and indicators show programmed set points and operational control status. The programmed voltage, current and overvoltage set points are displayed with two large 3½ digit LED displays. Operational Status LEDs indicate power on, shutdown, over temperature, overvoltage, constant current and voltage mode status. Control Status LEDs indicate front panel lockout, remote control and standby status. IEEE- 488.2 control LEDs indicate error, service request and remote address status.
The 4 kW Models will accept 200*/208 VAC, three phase or optional 400 or
480 VAC three phase input power.
4 Channel
8GHz Bandwidth (DSP-Enhanced), 7GHz Real-time Bandwidth
20GS/s Sample Rate in 4 Ch Mode
Standard Memory: 2Mpts/ch in 4 Ch Mode
OpenChoice(R) software with Windows XP OS delivers built-in networking and analysis
High resolution XGA display
Front Panel CD-R/W
Front Panel USB2.0 port
1000BaseT network connection
The 83712A Synthesized CW Generator is ideal for local oscillator and exciter applications. High output power and exceptional signal purity are combined with broad frequency coverage in this performance-packed synthesizer. Fundamental oscillators and switched low-pass filters deliver
Read More
The Agilent 6651A is one of the 665x series of 500 Watt, single output, series pass regulated power supplies, with an internal GPIB interface and SCPI programming. These models provide many talker/listener functions including remote programming of voltage and current with feedback of actual measured output values. 16 supplies can be connected to one GPIB interface via a serial link connection.
Option J03: 6V, 60A, 360W
Read More