The Agilent 85092C RF electronic calibration (ECal) module makes calibration of vector network analyzers fast, easy, and accurate. The RF ECal system is now easily controlled by one of two methods depending on the network analyzer. The Agilent PNA and ENA series of network analyzers controls the module directly via the USB interface. The modules can also be controlled via an 85097B interface kit used with an Agilent 8753E/ES/ET or 8720D/ES/ET.
ECal is an ideal solution for calibrating network analyzers. Performing a full two-port calibration takes less than half the time and number of connections using ECal versus mechanical cal kits. Furthermore, the accuracy of the calibration is comparable between electronic and mechanical methods. Traditional mechanical calibrations require intensive operator interaction which is prone to errors. With ECal, the operator simply connects the ECal module to the network analyzer and the software controls the rest.
Agilent HP Keysight 85092C 2-Port RF Electronic Calibration (ECal) Module, Type-N, 50-Ohm
Read More
Spectral purity is the key contribution of the Agilent HP Keysight 8663A signal generator, making it ideal for many radar, satellite communication, and phase noise measurement applications. Typical absolute phase noise performance of this generator at a 1 kHz offset is as low as -135 dBc/Hz, depending on the band of operation. The frequency range of the Agilent 8663A is 100 kHz to 2560 MHz. It offers versatile AM, FM, phase (option 002), and pulse modulation using either internal or externally applied modulating signals. A programmable 10 Hz to 99.9 kHz modulation synthesizer provides internal rate generation for all four modulation types and can be swept in either a log or linear fashion. The signal generator also has simultaneous modulation capability.
Read More
The Agilent Technologies 8163B lightwave multimeter is a basic measurement tool that provides flexible modular configuration and easy control of test solutions. This mainframe is used for optical component test.
Photo and Serial Number may be a like representation, for more detailed information please contact us prior to ordering.
Read More
Includes OEM Calibration.
The Agilent E4413A diode power sensor, with wide dynamic range, is designed for use with the EPM and EPM-P series power meters for power measurements on CW signals from 50 MHz to 26.5 GHz. The E4413A power sensor provides extremely low SWR to minimize the source and sensor mismatch errors. Also, for comprehensive error correction, the calibration factors, linearity and temperature error-correction information are stored in EEPROM. The sensor’s power measurements are traceable to the U.S. National Institute of Standards and Technology (NIST).
Read More
The TDS3000B Series oscilloscope packs the power of digital phosphor waveform acquisition technology, automatic anomaly detection, web-based remote control and five application-specific modules into a lightweight, battery-capable design.
The TDS3014B is a 4-channel, 100MHZ Oscilloscope with a sample rate of 1.25 GS/s.
Read More
HP/Agilent Keysight N5766A Power Supply, 40 V, 38 A, 1520 W with 5185-8802
5185-8802 – Power Cord, Strain Relief Assembly, AC Input Cover, Analog Connector, Shield Assembly Hardware, Documentation, CD Rom
- Small, High Density Package
- Easy Front-Panel Operation
- Extensive Device Protection
- Simplify System Connections