The Agilent 8473C Low-Barrier Schottky Diode (LBSD) detector has been widely used for many years in a variety of applications including leveling and power sensing . It offers good performance and ruggedness. Matched pairs (Option 001) offer very good detector tracking.
Read More
The Agilent 8471D is a low-cost, planar-doped barrier detector offering excellent performance to 2 GHz. A negative polarity output is standard, and a positive polarity is available as Option 103. A load option (Option 102) extends the square-law region to at least -10 dBm. The Agilent 8471D has a BNC (m) input connector and a frequency range of 100 kHz to 2 GHz, making it ideal for use in RF and low microwave applications.
Read More
The Agilent 54659B RS-232 & Parallel Measurement Storage Module is compatible with Agilent 54600B-series scopes and the Agilent 54645A or 54645D. The Agilent 54659B can be used with the Agilent 54620A/C logic analyzers for I/0 only. Need to analyze signals via RS-232 or parallel in the frequency domain with FFT? Need more nonvolative waveform memory? This is the module you need for your Agilent 54600-series scope.
Read More
The Agilent 16338A contains four types of test leads and a mating cable, which are designed to operate with the Agilent 4338A and 4338B Milliohmmeters. These test leads can be mixed or matched depending on the type of sample being measured.
Read More
The Agilent 16047B test fixture with safe guard is designed for use with the 4061A, 4192A, 4263A/B, 4274A, 4276A, 4277A, 4279A and 4284A LCR or LCZ-type Meters.
Read More
The Agilent 16044A is designed for impedance evaluations of low impedance SMD of up to 10MHz. The minimum SMD size that this fixture is adapted to evaluate is 1.6(L)x0.8(W)[mm]. The Agilent 16044A has a Kelvin (4-Terminal) contact, which ensures repeatable measurements. It is also equipped with a mechanism for easily performing open and short compensation.
Read More
The Agilent 11940A is a hand-held probe specially designed to measure magnetic field radiation from surface currents, slots, cable, and ICs for EMC diagnostic and troubleshooting measurements. Its unique design results in a high level of electric field rejection. This significantly reduces errors allowing calibrated and repeatable measurements. Each probe is calibrated and comes with a two-meter, RG-223 coaxial cable, an SMA (f) to Type-N (m) adapter, and an SMA (f) to BNC (m) adapter.
Read More
The Agilent 11906C adapter kit is available to provide connections between 7-16 connectors and 7 mm connectors. The female 7-16 connectors in these kits feature special retracted threads that do not compress the gasket when connecting to a general-purpose 7-16 connector. This allows the connectors to be properly mated with only 20 in-lbs (1.6 ft-lbs) of torque, instead of the usual 18.5 to 22 ft-lbs of torque, reducing the possibility of damaging the test ports of a network analyzer. Modern wireless communication systems require high-performance components offering low VSWR and low intermodulation distortion at high transmit power levels. To meet these needs, 7-16 connectors are becoming increasingly common in base station transmitters, amplifiers, duplexers, and other products. These connectors conform to IEC 169-4, DIN 47223, European standard EN 122190, and British standard BSEN 122190.
Read More
The Agilent 11904C is a metrology grade, 2.4 mm male to 2.92 mm female adapter with dc to 40 GHz operation. It is 13.3 mm in length and has a diameter of 9 mm.
Read More