Anoison PA2225A 2.4mm (m) to 3.5mm (m) Adapter
DC-33 GHz, 50-Ohm, VSWR 1.15 Max
Why Pay More?
Compare to PE9649
HP/Agilent 66000A Mainframe with 7 Blanks 66000-40006
Newport F-1015 Precision Single-Mode Fiber Coupler
Melles Griot 07TXS724 Linear Translation Stage
li>Black anodized aluminum
Travel: 13 to 25 mm
Resolution: <3μm
Travel straightness: <30 arc seconds
Post mountable
Center- or side-mounted micrometers
Position-locking feature
The Agilent 34905A RF multiplexer module for the 34970A Data Acquisition/Switch Unit offers broadband switching capabilities for high-frequency and pulsed signals. Use it to route test signals between your device under test and your signal generator, oscilloscope, spectrum analyzer, or other instrumentation. The RF multiplexers are arranged as two independent 1 x 4 multiplexers, each with a common shield and a switched center conductor. Connections can be made directly to SMB inputs with 2 GHz usable bandwidth, or to the BNC-to-SMB adapters provided with 1 GHz bandwidth. Multiple banks may be cascaded together for applications requiring even larger topologies– create a stubless 16:1 multiplexer in a single frame.
The Agilent 1162A Miniature Passive probe is a small, rugged, general purpose probe for use with all Infiniium oscilloscopes. It is fully compatible with the Agilent AutoProbe interface which completely configures the Agilent Infiniium oscilloscope for the probe. The cable has a Kevlar strengthener for added pull strength. The general purpose retractable hook tip is made from a durable music wire and probe tips are replaceable. The 1162A probe comes with a wide range of accessories including an Agilent Browser that installs over the probe tip. The Browser utilizes a crown point pogo pin that digs into solder and absorbs small hand movements, so is less likely to slip. There is also an alligator lead for general purpose probing, 4 spring grounds for high frequency measurements, a socketed ground lead and IC clips for probing surface mount devices. The handle of the probe can be removed, leaving a miniature probe body with a narrow and sharp tip ideal for probing dense circuit boards.