The Agilent 34905A RF multiplexer module for the 34970A Data Acquisition/Switch Unit offers broadband switching capabilities for high-frequency and pulsed signals. Use it to route test signals between your device under test and your signal generator, oscilloscope, spectrum analyzer, or other instrumentation. The RF multiplexers are arranged as two independent 1 x 4 multiplexers, each with a common shield and a switched center conductor. Connections can be made directly to SMB inputs with 2 GHz usable bandwidth, or to the BNC-to-SMB adapters provided with 1 GHz bandwidth. Multiple banks may be cascaded together for applications requiring even larger topologies– create a stubless 16:1 multiplexer in a single frame.
Read More
The Agilent 1162A Miniature Passive probe is a small, rugged, general purpose probe for use with all Infiniium oscilloscopes. It is fully compatible with the Agilent AutoProbe interface which completely configures the Agilent Infiniium oscilloscope for the probe. The cable has a Kevlar strengthener for added pull strength. The general purpose retractable hook tip is made from a durable music wire and probe tips are replaceable. The 1162A probe comes with a wide range of accessories including an Agilent Browser that installs over the probe tip. The Browser utilizes a crown point pogo pin that digs into solder and absorbs small hand movements, so is less likely to slip. There is also an alligator lead for general purpose probing, 4 spring grounds for high frequency measurements, a socketed ground lead and IC clips for probing surface mount devices. The handle of the probe can be removed, leaving a miniature probe body with a narrow and sharp tip ideal for probing dense circuit boards.
Read More
The Tektronix SM-11 Multi-channel Unit expands the 11801B Oscilloscope to 136 channels. Each SM-11 accepts up to 16 of the SD-Series sampling heads. An 11801B mainframe with option 1M is capable of driving up to four SM-11 units. The entire system can be driven through a single GPIB address.
The 11801B/1M acquisition system is designed to acquire up to 68 channels in a single acquisition. Thus, two acquisition cycles are necessary to acquire all 136 channels.
Read More
