Pulse Pattern
Keysight 81101A Pulse Generator, 50 MHz
The Agilent 81101A 50 MHz single-channel Pulse Generator is the economy, entry-level instrument of the 81100 family. All timing parameters (repetition rate, delay, width and transitions) are variable.
The instrument comprises a PLL oscillator that enables the repetition rate to be kept within 0.01% accuracy.
Double-pulses and pulse bursts are available. All pulses can be triggered externally when the PLL is turned off. Bursts can also be triggered by the internal PLL if it is not in use as the repetition-rate generator. An external width (pulse recovery) mode is available, too.
The selectable 50/1000 Ohm source resistance allows output amplitudes up to 10 or 20 Vpp respectively into a 50 Ohm load
Read MorePrecise edge-positioning, plus the ability to simulate digital signals as they occur in the real world, makes the Agilent 8110A pulse pattern generator stand out as an ideal partner for your Agilent oscilloscope or logic analyzer. On the bench you can verify designs so you can achieve reliable results quickly at frequencies where emulation becomes uncertain or cumbersome. In systems high resolution lets you optimize yield. True-to-life signals improve measurement credibility.
Each Agilent 8110A 150 MHz single- or dual-channel pulse pattern generator requires 1 or 2 output modules Agilent 81103A.
The Agilent 8110A Pulse pattern generator can be factory-configured with one or two channels and can include a PLL module and a deskew module. The second channel and the modules are retrofitable.
Read MoreKeysight 8110A Pulse Pattern Generator, 150 MHz
Precise edge-positioning, plus the ability to simulate digital signals as they occur in the real world, makes the Agilent 8110A pulse pattern generator stand out as an ideal partner for your Agilent oscilloscope or logic analyzer. On the bench you can verify designs so you can achieve reliable results quickly at frequencies where emulation becomes uncertain or cumbersome. In systems high resolution lets you optimize yield. True-to-life signals improve measurement credibility.
Each Agilent 8110A 150 MHz single- or dual-channel pulse pattern generator requires 1 or 2 output modules Agilent 81103A.
The Agilent 8110A Pulse pattern generator can be factory-configured with one or two channels and can include a PLL module and a deskew module. The second channel and the modules are retrofitable.
Read More