The Agilent 85052D economy mechanical calibration kit contains precision standard devices to characterize the systematic errors of Agilent network analyzers in the 3.5 mm interface. This kit also contains adapters to change the sex of the test port and a torque wrench for proper connection. Included are standards definitions on disk. Connector gauges may be ordered separately.
Included:
85052-60006 3.5 mm Male Short
85052-60007 3.5 mm Female Short
85052-60008 3.5 mm Male Open
85052-60009 3.5 mm Female Open
00902-60003 3.5 mm Male Broadband Load
00902-60004 3.5 mm Female Broadband Load
85052-60012 3.5 mm (F-F) Adapter
85052-60013 3.5(f)- 3.5 (m) Adapter
85052-60014 – 3.5(m) – 3.5 (m)
8710-1761 Wrench, Open End for 7mm Flats
8710-1765 5/16 in (8 in-lb) Torque Wrench Adapter
Keysight 85052D Economy Mechanical Calibration Kit, 3.5 mm
Read More
The Agilent U11644A calibration kit contains the precision mechanical standards required to calibrate the systematic errors of Agilent network analyzers. This calibration kit has a precision airline for performing the Thru-Reflect-Line (TRL) calibration, the most accurate error-correction technique for coaxial measurements. This kit also contains flush short circuit, a precision shim, and a fixed termination.
Read More
OML V12CAL Calibration Kit for WR-12. Compatible with PNA/PNA-X, E836XB/C, 8510B/C, Anritsu 37xxxD Network Analyzers
Read More
The Agilent N4691B MW electronic calibration (ECal) module makes calibration of vector network analyzers fast, easy and accurate. The RF ECal system is now easily controlled by one of two methods depending on the network analyzer. The Agilent PNA and ENA series of network analyzers controls the module directly via the USB interface. The modules can also be controlled via an 85097B interface kit when used with an Agilent 8753E/8753ES/8753ET or 8720D/8720ES/8720ET. ECal is an ideal solution for calibrating network analyzers.
Read More
The Agilent 85056K mechanical calibration kit contains precision standard devices to characterize the systematic errors of Agilent network analyzers. This kit supports both 2.4 and 2.92 mm connectors. It also contains adapters to change the sex of the test port, connector gauges for verifying and maintaining the connector interface, and a torque wrench for proper connection. Included are standards definitions on disk.
Read More
The Agilent R11644A calibration kit contains the precision mechanical standards required to calibrate the systematic errors of Agilent network analyzers. This calibration kit has a precision airline for performing the Thru-Reflect-Line (TRL) calibration, the most accurate error-correction technique for coaxial measurements. This kit also contains flush short circuit, a precision shim, and a fixed termination.
Read More
The Agilent 85056A mechanical calibration kit contains precision standard devices to characterize the systematic errors of Agilent network analyzers in the 2.4 mm interface. This kit also contains adapters to change the sex of the test port, connector gauges for verifying and maintaining the connector interface, and a torque wrench for proper connection. Included are standards definitions on disk.
Read More