Keysight E4443A-111/115/1DS/219/226/241 PSA Series Spectrum Analyzer, 3 Hz – 6.7 GHz
The HP/Agilent E4443A PSA high-performance spectrum analyzer measures and monitors complex RF signals up to 6.7 GHz. Agilent E4443A Key Specifications Dynamic Range -155 dBm displayed average noise level (DANL) +17 dBm third order intercept (TOI) (+19 dBm typical) -116 dBc/Hz phase noise at 10 kHz offset (-118 dBc/Hz typical) Accuracy ±0.62 dB absolute amplitude accuracy (±0.24 dB typical) ±0.38 dB frequency response (±0.11 dB typical) ±0.07 dB log amplification linearity Speed Fast low-level spur search < 30 ms fast ACP measurement 50 measurements per second local update rate (45 for remote operation)
Read More
The Agilent E4419B is a low-cost, high-performance, dual-channel, programmable power meter. It is fully compatible with the 8480 series and the E-series power sensors (except the E9320A family). Depending upon which sensor is used, the E4419B can measure from -70 dBm to +44 dBm at frequencies from 9 kHz to 110 GHz.
Designed for bench and automatic test equipment use (ATE), the E4419B makes fast (up to 100 readings per second with E-series sensors), accurate and repeatable power measurements.
The E4419B is a true dual-channel power meter, which means that you get two simultaneous power readings on the display.
Read More
This unit includes option 002.
Unit Calibrated and has slightly dim screen.
The Agilent E4419B is a low-cost, high-performance, dual-channel, programmable power meter. It is fully compatible with the 8480 series and the E-series power sensors (except the E9320A family). Depending upon which sensor is used, the E4419B can measure from -70 dBm to +44 dBm at frequencies from 9 kHz to 110 GHz. Designed for bench and automatic test equipment use (ATE), the E4419B makes fast (up to 100 readings per second with E-series sensors), accurate and repeatable power measurements. The E4419B is a true dual-channel power meter, which means that you get two simultaneous power readings on the display
Read More
This unit includes option 006 Parallel Front and Rear Sensor Input and Calibrator and CALIBRATION
The Agilent Keysight E4419B is a low-cost, high-performance, dual-channel, programmable power meter. It is fully compatible with the 8480 series and the E-series power sensors (except the E9320A family). Depending upon which sensor is used, the E4419B can measure from -70 dBm to +44 dBm at frequencies from 9 kHz to 110 GHz. Designed for bench and automatic test equipment use (ATE), the E4419B makes fast (up to 100 readings per second with E-series sensors), accurate and repeatable power measurements. The E4419B is a true dual-channel power meter, which means that you get two simultaneous power readings on the display
Read More
The WCA330 (DC to 3 GHz) and WCA380 (DC to 8 GHz) are based on real-time spectrum analyzers that allow the seamless capture of signal with spans up to 30 MHz. The ability to measure burst signals and infrequently occurring signals, such as those from GSM, IS-136, PDC or IS-95 over a continuous block of time and span of frequencies and RACH signal of mobile station, allows the user to evaluate significantly more information than traditional sweeping spectrum analyzers.
Read More
The HP/Agilent E4443A PSA high-performance spectrum analyzer measures and monitors complex RF signals up to 6.7 GHz. Agilent E4443A Key Specifications Dynamic Range -155 dBm displayed average noise level (DANL) +17 dBm third order intercept (TOI) (+19 dBm typical) -116 dBc/Hz phase noise at 10 kHz offset (-118 dBc/Hz typical) Accuracy ±0.62 dB absolute amplitude accuracy (±0.24 dB typical) ±0.38 dB frequency response (±0.11 dB typical) ±0.07 dB log amplification linearity Speed Fast low-level spur search < 30 ms fast ACP measurement 50 measurements per second local update rate (45 for remote operation)
Read More
The R&S FSEM30 Spectrum Analyzer from Rohde& Schwarz has been optimized both for general purpose measurements and meeting the stringent requirements of testing advanced digital communication systems. The FSEM30 also offers high measurement speed and excellent characteristics.
Read More
The Agilent E4419B is a low-cost, high-performance, dual-channel, programmable power meter. It is fully compatible with the 8480 series and the E-series power sensors (except the E9320A family). Depending upon which sensor is used, the E4419B can measure from -70 dBm to +44 dBm at frequencies from 9 kHz to 110 GHz.
Designed for bench and automatic test equipment use (ATE), the E4419B makes fast (up to 100 readings per second with E-series sensors), accurate and repeatable power measurements.
The E4419B is a true dual-channel power meter, which means that you get two simultaneous power readings on the display.
Read More