equipment
The Agilent 8496B dc to 18 GHz manual step attenuator offers exceptional repeatability and reliability. Attenuation is provided in 10 dB steps from 0 to 110 dB. Precision gold-plated leaf springs ensure long life (over 5 million cycles) and very high attenuator repeatability (typically 0.01 dB). Custom step attenuator/switch combinations are possible. The Agilent 11716A, 11716B and 11716C interconnect kits provide quick connection of Agilent 8494B, 8494G, 8495G, 8495H, 8496A and 8496G 1 dB and 10 dB step attenuators in series for greater dynamic range with 1 dB steps.
Read MoreKeysight 34921A 40-Channel Armature Multiplexer
The HP/Agilent Keysight 34921A module for the 34980A Multifunction Switch/Measure Unit is the most versatile multiplexer for general purpose scanning. It has low thermal offset characteristics and a built-in thermocouple reference on the terminal block, making it ideal for temperature measurements directly to the internal DMM. The dense, multi-function switching with 100 channel/second scan rates addresses a broad spectrum of data acquisition applications.
Four additional fused inputs (44 channels total) route up to 1A of current to the internal DMM, allowing AC and DC current measurements without the need for external shunt resistors. Standard 50-pin Dsub connectors allow for use with standard cables, terminal blocks, or mass interconnect solutions.
Photo and Serial Number may be a like representation, for more detailed information please contact us prior to ordering.
Read MoreKeysight Q85026A WR-22 Waveguide Detector, 33 GHz to 50 GHz
The Agilent Q85026A waveguide detector offers a frequency range of 33 to 50 GHz and is for use with the Agilent 8757 only in either ac or dc detection mode.
Read MoreColby Instruments PG5000A. Colby Instruments PG5000A 10 MHz to 5000 MHz Dual Output Pulse Generator. Type N input for sine wave. Dual output type SMA connectors. Digital display of output offset and amplitude.
Read MoreKeysight 3048A-K21 AM detector Filter 1 Hz – 40 MHz for 3048A Phase Noise System
Read MoreVelocity Microwave Vertex Data Acquisition Kit for use with Galaxy Kits or Datum Gages
Velocity Microwave Vertex Data Acquisition Kit for use with Galaxy Kits or Datum Gages to easily obtain and save results right to your PC. In sixty seconds, Vertex obtains 375 data points. The included software takes these raw measurements and instantly provides the data to minimize the measurement uncertainty. Vertex provides the minimum, maximum, avaerage and standard deviation of you measurements. Included in the kit is the cable needed to connect your Galaxy datum gage to your PC as well as the software necessary to downlaod your results into Microsoft Excel.
Read MoreFluke CFP-100-S Singlemode Optical Loss Test Set Monthly Rental
The Fluke CFP-100-S Optical Loss Test Set allows for testing of singlemode fibers at 1310nm and 1550nm wavelengths. Used in conjunction with the DSX-800, the CFP-100-S allows the user to test two fibers and both wavelengths in just three seconds! The Fluke CFP-100-S weekly rental kit consists of two optical modules, test reference cords and two adapters. The renter can specify the type of connector required. Connector choices include SC, FC, LC or ST.
Must be used in conjunction with the DSX-8000.
Note: Photo shows SC Connector Option and Quad Modules
Read MoreFluke CFP-100-M Multimode Optical Loss Test Set Monthly Rental
The Fluke CFP-100-M Optical Loss Test Set allows for testing of both 50/125 and 62.5/125 multimode fibers at 850nm and 1300nm wavelengths. Used in conjunction with the DSX-800, the CFP-100-M allows the user to test two fibers and both wavelengths in just three seconds! The Fluke CFP-100-M weekly rental kit consists of two optical modules, test reference cords and two adapters. The renter can specify the type of connector required. Connector choices include SC, FC, LC or ST.
Must be used in conjunction with the DSX-8000.
Note: Photo shows SC Connector Option and Quad Modules
Read MoreKeysight 6632A DC Power Supply 20V/5A
The Agilent 6632A System dc Power Supply is an ideal power source for demanding production test applications. This dc power supply offers high performance and precision measurements in a one-box solution. The HP 6632A features HP-IB programming of voltage and current, measured voltage and current readback over the HP-IB, programmable overvoltage and overcurrent protection. Self test occurs at power-on or from an HPIB command. This unit also features electronic calibration via HP-IB.
Read More