-41.5% Accuracy
-100 MS/s Sample Rate
-2 and 4 Channels
-Record Lengths to 120 K (Opt. XL)
-Floppy Disk Storage
-Roll Mode Allows You to See Acquired Data Points Without Waiting for the Acquisition of the Complete Waveform
-Use the Video Trigger Mode to See NTSC, PAL, SECAM Signals or Your Own Custom Video Signals
-Capture Those Glitches with the 10 ns Peak Detect Mode
All channels of the HFS9003 are slaved to a common clock, resulting in highly accurate channel-to-channel edge placement. This makes the HFS9000 ideal for precise characterization and evaluation of synchronous devices having multiple, and possibly interactive, inputs.
Read More
The Tektronix DPO4054 digital phosphor oscilloscope (DPO) delivers the performance you need to visualize even your most demanding signals. With bandwidth of 1 GHz, and with a minimum of 5 X oversampling on all channels and sin(x)/x interpolation standard, you can be confident that even the fastest transient events will be captured and displayed accurately. The standard 10 M record length on all channels enables you to capture long windows of signal activity while maintaining fine timing resolution.
The Tektronix DPO4054 offers a variety of analytical solutions including cursors, 25 automatic measurements, statistics, and waveform math. Despite a tiny footprint (only 5.4″ deep) and light weight (11 lbs.), the DPO4000 Series offers exceptional performance, a large 10.4″ XGA display and knob per channel vertical controls.
Read More
The SD20 is a single-channel, 20 GHz loopthrough sampling head designed for low-loss testing in applications such as microwave systems research and development, digital device characterization and high-speed digital communications circuit design. It provides an acquisition rise time of 17.5 ps with typically 750 µVRMS of noise (350 µV with smoothing) to ensure clean, undistorted signals. The SD20 is nonterminated and keeps losses to a minimum by routing the signal of interest directly through the sampling head without the need of a power divider. The SD20 can also be used for customized TDR measurements of transmission lines and controlled impedance devices. An external signal generator may be used, instead of the SD24 step generator, to tailor the TDR stimulus to fit a particular situation. For instance, slower slew rates or higher amplitude may be utilized, or you may perform half-sine or impulse testing. In digital communications, the SD20 is useful for viewing and triggering on the clock signal without the use of a power divider.
Read More
The Tektronix P6247 enable users to make time domain or frequency domain measurements on high bandwidth signals commonly found in disk drive, digital IC design (RAMBUS) and communication applications (Gigabit Ethernet, IEEE-1394 Firewire and Fibre Channel). The small probe head geometry and assorted probe tip accessories allow these probes to easily accommodate manual probing of surface mount devices while maintaining high CMRR. The P6247 are ideal for design verification of disk drive read channel electronics and timing analysis for troubleshooting ground bounce problems associated with high speed logic. They can also be used for pulse shape or cross talk compliance testing of high speed communication signals.
Read More
- « Previous
- 1
- …
- 278
- 279
- 280