Includes a E9288A Cable
The Agilent E4417A dual channel EPM-P series power meter, is designed for peak, average, peak-to-average ratio and time-gated measurements, using the E9320 peak and average power sensors. The E4417A power meter is compatible with all 8480 and E-series power sensors.
The EPM-P series power meters (E4416A and E4417A) do not have 43X code compatibility because they are targeted at new applications such as time-gated power measurements. 43X code compatibility is however provided by the EPM series power meters (E4418B and E4419B) as they are a direct replacement for the 436A, 437B and 438A power meters.
Read More
The Agilent N3306A is a 600 W electronic load module for use in either the N3300A or N3301A electronic load mainframe in system applications. The N3306A load module is fast and accurate, for programming in constant current, constant voltage, or constant resistance modes, or for making voltage, current or power measurements. The N3306A can also digitize waveforms. A single GPIB address is all you need for complete control and read-back of the N3306A load module within a single N3300A or N3301A mainframe. The N3306A electronic load provides fast operation and the accurate programming and read-back needed for high-volume DC power supply test systems.
Keysight N3306A DC Electronic Load Module, 0-60V, 120A, 600 W, for N330X mainframes, 2 slots
Read More
The Agilent 87512A transmission/reflection test kits provide the capability to measure the reflection and transmission characteristics of 50 ohm devices up to 2 GHz with an Agilent network analyzer. The test port of the Agilent 87512A is a 50 ohm type N(f) connector. The Agilent 87512A includes precision short/load termination for calibration.
Read More
Keysight 8664A-004 High-Performance Signal Generator, 3 GHz with Option 004
The Agilent 8664A signal generator is suited for basic receiver testing up to 3.0 GHz. With Option 004 (low-noise enhancement), it can be used for out-of-channel receiver testing or as a clock source where having the lowest phase jitter is important. Radar testing can be done by adding Option 008 (pulse modulation) . Pulse width and delay can be internally adjusted between 50 ns and 999 ns, eliminating the need for an external pulse generator. Standard FM rates of up to 2 MHz and deviations to 10 MHz are suitable for many applications such as high-speed digital communications.
Read More
The Rohde & Schwarz FSH3 model 03 includes a built-in preamplifier with a resolution bandwidth of 100 Hz to 1 MHz. With filter bandwidths down to 100 Hz it ensures high frequency resolution to detect closely spaced signals.
Rohde & Schwarz FSH3 Handheld Spectrum Analyzer, 100 kHz to 3 GHz
Read More
The Agilent E3633A is a 160 / 200 W single output, dual range programmable DC power supply designed to meet the most exacting engineering requirements with traditional Agilent quality and reliability.
Unit Calibrated
If calibration expiration is less than 6 months, unit will be re-calibrated.
Re-Calibration can take up to 10 days.
Keysight E3633A 200 W Power Supply, 8 V, 20 A or 20 V, 10 A
Photo and Serial Number may be a like representation, for more detailed information please contact us prior to ordering
Read More