Used
Keysight 10076A High Voltage Probe, 100:1, 4 kV, 250 MHz
The Agilent 10076A 4 kV 100:1 passive probe gives you the voltage and bandwidth you need for making high-voltage measurements. Its compact design makes it easier to probe today’s small power electronics components and its rugged construction means it can withstand rough handling without breaking.
Read MoreThe Tektronix 80E04 is a dual-channel Time Domain Reflectometry (TDR) sampling module. This sampling module provides an acquisition rise time of 17.5 ps or less, with a typical 20 GHz equivalent bandwidth. Each channel of the Tektronix 80E04 is capable of generating a fast step for use in TDR mode and the acquisition portion of the sampling module monitors the incident step and any reflected energy. The reflected rise time of the TDR step is 35 ps or less and the polarity of each channel’s step can be selected independently. This allows for differential or common-mode testing of two coupled lines, in addition to the independent testing of isolated lines. The Tektronix 80E04 characterizes crosstalk by using the TDR step to drive one line while monitoring a second line with the other channel. The “filter” function on the CSA8000/TDS8000 can be used with TDR or crosstalk measurements to characterize expected system performance with slower edge rates.
Read MoreThe 80E02 is a dual-channel, 12.5 GHz sampling module specifically designed for low-noise measurements in digital communications and device characterization applications. It provides an acquisition rise time of 28 ps and typically 400 µV RMS of displayed noise.
The 80E02 is the ideal instrument for low-noise applications. Common applications for the 80E02 are capturing and displaying switching characteristics of high-speed communications circuits, making accurate statistical measurements of signal noise and signal timing jitter, or obtaining stable timing measurements of fast digital ICs.
Read MoreTektronix 067-0691-01 Oscilloscope Calibration Fixture
Tektronix 067-0691-01 Oscilloscope Calibration Fixture
Read MoreWiltron 60NF50 Reflection Test Set in Wooden Case
Wiltron 60NF50 Reflection Test Set in Wooden Case
Read MoreTektronix 7M11 Delay Line, Variable, Dual 50 Ohm
Tektronix 7M11 Delay Line, Variable, Dual 50 Ohm
Read MoreTektronix WFM 8300 Advanced 3G/HD/SD Waveform Monitor Options 3G/GEN/AD/3D/PHY
Read More-41.5% Accuracy
-100 MS/s Sample Rate
-2 and 4 Channels
-Record Lengths to 120 K (Opt. XL)
-Floppy Disk Storage
-Roll Mode Allows You to See Acquired Data Points Without Waiting for the Acquisition of the Complete Waveform
-Use the Video Trigger Mode to See NTSC, PAL, SECAM Signals or Your Own Custom Video Signals
-Capture Those Glitches with the 10 ns Peak Detect Mode
Keithley 2430 1KW SourceMeter
– Five instruments in one (IV Source, IVR Measure)
– 0 to 100V, 10A, 1000W Pulse Mode
– Source and sink (4-quadrant) operation
– 0.012% basic measure accuracy with 5-1/2 digit resolution
– 2-, 4-, and 6-wire remote V-source and measure sensing
– 1700 readings/second at 4-1/2 digits via GPIB
– Pass/Fail comparator for fast sorting/binning
– Available high speed sense lead contact check function
– Programmable DIO port for automation/handler/prober control
– Standard SCPI GPIB, RS-232, and Keithley Trigger Link interfaces