Used
Keysight 16047B High Voltage Test Fixture with Safe Guard
The Agilent 16047B test fixture with safe guard is designed for use with the 4061A, 4192A, 4263A/B, 4274A, 4276A, 4277A, 4279A and 4284A LCR or LCZ-type Meters.
Read MoreKeysight 16044A SMD LCR Kelvin Contact Test Fixture
The Agilent 16044A is designed for impedance evaluations of low impedance SMD of up to 10MHz. The minimum SMD size that this fixture is adapted to evaluate is 1.6(L)x0.8(W)[mm]. The Agilent 16044A has a Kelvin (4-Terminal) contact, which ensures repeatable measurements. It is also equipped with a mechanism for easily performing open and short compensation.
Read MoreKeysight 11940A Close Field Probe, 30 MHz to 1 GHz
The Agilent 11940A is a hand-held probe specially designed to measure magnetic field radiation from surface currents, slots, cable, and ICs for EMC diagnostic and troubleshooting measurements. Its unique design results in a high level of electric field rejection. This significantly reduces errors allowing calibrated and repeatable measurements. Each probe is calibrated and comes with a two-meter, RG-223 coaxial cable, an SMA (f) to Type-N (m) adapter, and an SMA (f) to BNC (m) adapter.
Read MoreKeysight 11906C 7-16 to 7-mm Adapter Kit, DC to 7.5 GHz
The Agilent 11906C adapter kit is available to provide connections between 7-16 connectors and 7 mm connectors. The female 7-16 connectors in these kits feature special retracted threads that do not compress the gasket when connecting to a general-purpose 7-16 connector. This allows the connectors to be properly mated with only 20 in-lbs (1.6 ft-lbs) of torque, instead of the usual 18.5 to 22 ft-lbs of torque, reducing the possibility of damaging the test ports of a network analyzer. Modern wireless communication systems require high-performance components offering low VSWR and low intermodulation distortion at high transmit power levels. To meet these needs, 7-16 connectors are becoming increasingly common in base station transmitters, amplifiers, duplexers, and other products. These connectors conform to IEC 169-4, DIN 47223, European standard EN 122190, and British standard BSEN 122190.
Read MoreThe Agilent 11904C is a metrology grade, 2.4 mm male to 2.92 mm female adapter with dc to 40 GHz operation. It is 13.3 mm in length and has a diameter of 9 mm.
Read MoreKeysight 11903C Adapter, 2.4 mm (m) to Type-N (f), DC to 18 GHz
The Agilent 11903C is a metrology-grade, 2.4 mm male to type-N female adapter with dc to 18 GHz operation.
Read MoreKeysight 11903B Adapter 2.4 mm (f) to Type-N (f), DC to 18 GHz
See the Anoison PA5122C for alternate.
The Agilent 11903B is a metrology grade, 2.4 mm female to type-N female adapter with dc to 18 GHz operation.
Read MoreKeysight 11903A Adapter, 2.4 mm (m) to Type-N (m), DC to 18 GHz
The Agilent 11903A is a metrology-grade, 2.4 mm male to type-N male adapter with dc to 18 GHz operation.
Read MoreKeysight 1165A Miniature Passive Probe, 10:1, 10 MOhm, 1.5m
The Agilent 1165A minature passive probe is a small, rugged, general purpose probe for use with the 54830B/D, 54831B/D and 54832B/D Infiniium oscilloscopes. It is fully compatible with the Agilent Auto-Probe interface which completely configures the Infin
Read More