The E3458A processor probe provides an inexpensive way to control target microcontroller operation during the hardware and software development phases of Motorola CPU32-based prototypes. The processor probe controls the target microcontroller through the Motorola Background Mode Debug (BDM) port. Connection of a processor probe to a PC or workstation is made via LAN or RS-232.
Read More
The Agilent E1460A High-Density Relay Multiplexer is a C-size, 1-slot, register-based VXI module. This 64-channel multiplexer, using latching armature switches, offers a highly configurable, high point-count switching topology. Switching topologies include 64 two-wire, 32 three-wire, 32 four-wire, or 128 single- ended latching relay channels. This multiplexer consists of a component card with switches (labeled E1460-66202) and the QUIC screw terminal block (E1460-80011) that plugs onto the component card. Use of SCPI commands or status bit jumpers on the terminal card configures the E1460A “wire mode” as either a 128 x 1-wire, 64 x 2-wire, 32 x 3-wire, or 32 x 4-wire multiplexer. Applications for the E1460A include wire harness and cable testing, component testing, and printed circuit board testing.
Read More
This VXIplug&play driver is designed for computers operating either Windows® 95 or Windows® NT Version 3.51 or higher. The driver requires a VISA-compatible GP-IB/GPIB interface and the VISA® I/O Library Version 1.1 or higher. Programming with this driver does not depend upon an I/O library specific to your brand of GP-IB/GPIB interface, thus your programming code becomes much more portable.
Read More
The 8644A high performance generator provides excellent spectral purity for confidence in RF measurements.
Read More
The Agilent 85700A memory card provides 32kB of RAM for use with the 8590 E-Series, 8560 E-Series and 8560 EC-Series Spectrum Analyzers.
Read More
The Agilent 85134F is a 62.9 cm (24.75 in) long1 flexible cable set composed of a 2.4 mm female2 to PSC-3.5 mm female connector and a 2.4 mm female2 to 3.5 mm male connector. Cable frequency range is dc to 26.5 GHz with a return loss greater than or equal to 16 dB. Insertion loss is 0.31 * sqrt (f) + 0.2, where f is frequency in GHz, for the test port connector and 1.8 dB at maximum frequency for the device connector. Phase stability of semi-rigid/flexible cables is specified with a 90 degree bend using a 4 to 3 inch radius. Stability1 of the Agilent 85134F is less than 0.12 dB and phase is 0.13*f+ 0.5°, where f is frequency in GHz. 1 Cable length and stability are supplemental characteristics. 2 Special rugged female connector is designed specifically for connecting to the network analyzer test port, but does not mate with a standard male connector.
Read More
See Velocity Microwave TPXKIT-24-FM-26. Repairable – Lower Cost – 2-Year Warranty -10-Year Support
The Agilent 85133F is a 72 cm (28 in) long 1 flexible cable set composed of a 2.4 mm female 2 to PSC-2.4 mm female connector and a 2.4 mm female 2 to 2.4 mm male connector. Cable frequency range is dc to 50 GHz.
Read More
The Agilent 85133D is a 53 cm (21 in) long 1 semi-rigid cable set composed of a 2.4 mm female 2 to PSC-2.4 mm female connector and a 2.4 mm female 2 to 2.4 mm male connector. Cable frequency range is dc to 50 GHz with a return loss of 15 dB or better. Insertion loss is 0.55 * sqrt (f) + 0.2, where f is frequency in GHz, for the test port connector and 3.7 dB at maximum frequency for the device connector. Phase stability of semi-rigid/flexible cables is specified with a 90 degree bend using a 4 to 3 inch radius. Stability 1 of the Agilent 85133D is less than 0.06 dB and phase is 0.16*f, where f is frequency in GHz.
1 Cable length and stability are supplemental characteristics.
2 Special rugged female connector is designed specifically for connecting to the network analyzer test port, but does not mate with a standard male connector.
Read More